does anybody use Torque App for android?
i bought the pro version ( because the free version wouldnt work with my bluetooth OBD adaptor but pro does). it connects to the ECU so i can read Revs and stuff but it says i have no fault codes when i clearly do, the glow plug light is flashing and if i use my mates pc and VCDS i have a fault with the brake switches.
the engine is a AHU TDI 1997 from a golf 3 in a t25 camper.
i only bought it for revs and to check the codes. am i missing something?
Torque App for Android
Moderators: User administrators, Moderators
-
hotpod
- Registered user
- Posts: 239
- Joined: 11 Jan 2010, 10:44
- 80-90 Mem No: 7802
- Location: St Ives, Cornwall
- Contact:
Torque App for Android
1992 T3 LHD Syncro 16" 4 door doka 1.9na diesel
1990 T3 LHD Syncro 16" Westfalia Joker high top 1.9 TDI
1985 T3 LHD Westfalia Joker high top 1.9 Digijet
1980 T3 LHD factory high top 2.0 Aircooled
1990 T3 LHD Syncro 16" Westfalia Joker high top 1.9 TDI
1985 T3 LHD Westfalia Joker high top 1.9 Digijet
1980 T3 LHD factory high top 2.0 Aircooled
-
discipleofsketch
- Registered user
- Posts: 629
- Joined: 27 Aug 2012, 18:13
- 80-90 Mem No: 11538
- Location: Bristol
- Contact:
Re: Torque App for Android
I've got Torque Pro, and have the same thing with my 1998 new beetle - the gauges and stuff work, but it sais no fault codes found, even though loads show up when my local garage plug it into VAGCOM. Plugged my adapter into a friends Renault Clio, and Torque found some fault codes.
Unfortunately the ECU in my T25 1Z conversion is too old (1995) to be supported by my cheapy OBDII adapter, so I get nothing at all from Torque.
Not to hijack the thread, but I was looking at this on ebay earlier - full vagcom/ vcds software + cable for £48, sounds too good to be true, so probably is?
http://www.ebay.co.uk/itm/Vag-Com-Vcds- ... 3ce9cccd93" onclick="window.open(this.href);return false;
Will be keeping an eye on that - no bad feedback yet, but feels like a scam?
Unfortunately the ECU in my T25 1Z conversion is too old (1995) to be supported by my cheapy OBDII adapter, so I get nothing at all from Torque.
Not to hijack the thread, but I was looking at this on ebay earlier - full vagcom/ vcds software + cable for £48, sounds too good to be true, so probably is?
http://www.ebay.co.uk/itm/Vag-Com-Vcds- ... 3ce9cccd93" onclick="window.open(this.href);return false;
Will be keeping an eye on that - no bad feedback yet, but feels like a scam?
Former owner of 1983 DG panel van and 1983 Devon moonraker pop-top, 1.9 tdi (1z) conversion