What is the correct vacuum setup for a 1Z engine conversion

for questions and answers about alternative power transplants on the T25, GTi, Porsche,Subaru etc, this is the place. You must register to post but anyone can read.

Moderators: Moderators, User administrators

Post Reply
KR1S 76
Posts: 59
Joined: 19 Aug 2011, 13:10
80-90 Mem No: 0
Location: Canterbury, UK

What is the correct vacuum setup for a 1Z engine conversion

Post by KR1S 76 »

Image

Trying to figure out what the correct setup for the vacuum lines are... and after hours of trying to search online I've come up with this setup (digram above). Is this the correct way?

It used to have an AFN before someone installed the 1Z.

KR1S 76
Posts: 59
Joined: 19 Aug 2011, 13:10
80-90 Mem No: 0
Location: Canterbury, UK

Re: What is the correct vacuum setup for a 1Z engine conversion

Post by KR1S 76 »

nobody knows...?

scimdiesel
Posts: 29
Joined: 07 Oct 2013, 11:04
80-90 Mem No: 0

Re: What is the correct vacuum setup for a 1Z engine conversion

Post by scimdiesel »

I used this... Although to be honest it starts to make sence after you have a propper look...
http://www.myturbodiesel.com/wiki/cabin ... placement/

KR1S 76
Posts: 59
Joined: 19 Aug 2011, 13:10
80-90 Mem No: 0
Location: Canterbury, UK

Re: What is the correct vacuum setup for a 1Z engine conversion

Post by KR1S 76 »

Thanks for the link... that seemed to sort out the N75 Valve. But still need to figure out the N18 Valve and other hoses... The previous engine was from a Passat, no idea what code as it was as it had been taken off... could have been an AFN but cannot be 100% sure. Now has a 1Z from a mk3 1996 Golf 1.9 TDI.

This are the valves and other things it has ...
Image

The N18 Valve has a missing nipple so I gather I need a new one if I need this in the setup...
Image

What I thought was a tube coming from the air filter is actually from the ECU. So this air filter setup has no connection point for a hose:
Image

Im no expert and been trying to solve this by searching the web but have not come across anything that makes things clear... any sort of help would be appreciated... Thanks

syncroandy
Trader
Posts: 1618
Joined: 18 Oct 2005, 18:15
80-90 Mem No: 851
Location: North Lancs. UK
Contact:

Re: What is the correct vacuum setup for a 1Z engine conversion

Post by syncroandy »

I find the workshop manuals quite good for this sort of info, also the self-study guides are really useful too, eg. SSP153 has a couple of diagrams of the hose connections, and explains how the TDI systems works.
Syncrosport
Volkswagen Transporter, reloaded.

252 GC5 EJ25 AAN L90D
246 097 AFN AVL+ L90D

User avatar
discipleofsketch
Posts: 629
Joined: 27 Aug 2012, 18:13
80-90 Mem No: 11538
Location: Bristol
Contact:

Re: What is the correct vacuum setup for a 1Z engine conversion

Post by discipleofsketch »

I'm still learning about my 1z engine, but I know where those components are on mine:-

Image

So basically you want to know what those blue tubes are connected to right? I haven't got my van with me as it's in a friend's warehouse at the moment, but will hopefully get over there later this week, and will take some pictures.
Former owner of 1983 DG panel van and 1983 Devon moonraker pop-top, 1.9 tdi (1z) conversion

syncroandy
Trader
Posts: 1618
Joined: 18 Oct 2005, 18:15
80-90 Mem No: 851
Location: North Lancs. UK
Contact:

Re: What is the correct vacuum setup for a 1Z engine conversion

Post by syncroandy »

Syncrosport
Volkswagen Transporter, reloaded.

252 GC5 EJ25 AAN L90D
246 097 AFN AVL+ L90D

Post Reply