What size jubilee clip petrol filler neck

[timski]

Hi Guys,

Can anyone tell me which size jubilee clip I need for the top of the filler neck behind the petrol cap? It's for a 1991 DJ 2.1

Thanks,
Tim.

[CovKid]

I'm not sure either but as always, tis possible to join one jubille clip to another if you can't find one big enough.

[California Dreamin]

Late 'Plastic' filler neck is 48mm diameter going into the tank....I presume it would be the same at the top?
I think Brickwerks list the clamp for this but don't state what size it is.

Martin

[timski]

Thanks guys. Will have a gander on Brickwerks or join two together as CovKid suggests.

[Roydini]

It's a 60-70mm one on my 1983 Petrol DG with plastic filler tube. I replaced it recently along with the backing ring as they were fecked. Had to remove the whole tube and (carefully) cut the old one off with a hacksaw. It seems to be an area prone to rusting so I replaced with stainless steel. Brickwerks do a stainless backing ring if you need one I think.