Our temperature gauge has stopped working - think a connection must have been knocked when the exhaust was replaced. Radiator fan etc working fine, it's just the gauge that is not working.
Apparently it's an easy fix....can anyone quickly talk me through it?
Cheers
Mark
Temperature gauge
Moderators: User administrators, Moderators
-
DevonMark
- Registered user
- Posts: 267
- Joined: 02 Sep 2012, 14:58
- 80-90 Mem No: 11545
- Location: Exeter
Temperature gauge
1989 1.9l WBX hi-top
https://twitter.com/mark_lee
https://twitter.com/mark_lee
-
Eloise
- Registered user
- Posts: 149
- Joined: 01 Aug 2014, 21:57
- 80-90 Mem No: 13791
- Location: Sunny sheffield
Re: Temperature gauge
Hi,
There are two sensors on mine, both on the plastic thermostat housing. I presume one works temp and the other the pressure. Have a look to see if anything has come loose or has been knocked off. Both are two wire multi plugs and I think one is red and one is black.
Mines a 1.9 WBC
Cheers neil
There are two sensors on mine, both on the plastic thermostat housing. I presume one works temp and the other the pressure. Have a look to see if anything has come loose or has been knocked off. Both are two wire multi plugs and I think one is red and one is black.
Mines a 1.9 WBC
Cheers neil
1987 komet hi top. 1.9 wbx with plenty of rust
Re: Temperature gauge
Red/yellow one is temp sender Mark. Is yours early or late?
Late are two pin senders, early one is a single nipple that a male spade goes on to, on top of water pump.
Late are two pin senders, early one is a single nipple that a male spade goes on to, on top of water pump.