Audi V8 Alloys

[Kevster74]

Hi
Been looking at some alloys from a Audi V8, anyone fitted any?
Know centre bore is large enough, on FB been told may have to drill holes larger and fit spacers?
They are 8x17 running 225 45 tyres
Cheers
Kev

[g60steve]

Hi
Been looking at some alloys from a Audi V8, anyone fitted any?
Know centre bore is large enough, on FB been told may have to drill holes larger and fit spacers?
They are 8x17 running 225 45 tyres
Cheers
Kev

A photo or link to the alloys in question would help?

Take what you've been told on FB with a big pinch of salt because most Audi alloys have a 57.1mm centre bore...only the newer versions have 66mm centre bore same as a T25.
Plus they take 14mm bolts the same as a T25.
Spacers may be required depending on the offset(ET)?

[Kevster74]

Thanks Steve
I have seen a pic of them but havent got it to forward.
The centre bore is defo 70mm with plastic spigot rings to take it down for the Audi. The ET he is fairly sure is 35 which i think would work. If i needed spacers not sure how that would affect them.
Cheers
Kev

[g60steve]

Thanks Steve
I have seen a pic of them but havent got it to forward.
The centre bore is defo 70mm with plastic spigot rings to take it down for the Audi. The ET he is fairly sure is 35 which i think would work. If i needed spacers not sure how that would affect them.
Cheers
Kev

Genuine Audi wheels do not have a centre bore of 70mm.
Like I said...the majority of genuine Audi alloys are 57.1mm...only some of the later B6/B7 Audis have 66mm centre bore.
None use spigot rings from the factory.

If they're 70mm they must be non-genuine alloys?