For documenting and technical details of T25 restorations and major repairs This section is for major restorations only.where to buy a panel or where to buy window rubbers belong in the bodywork seats and glass section.
Also please note,we need pictures of the restorations,without them posts are pretty useless.[\b]
Picture heavy and detailed threads , not for general banter or advertising
Traders welcome to post but not to advertise blatently
Threads will be cleaned of chit chat.
Well remeber those knackered old spats with the fixings missing..well
they are all the same now and need cleaning and then sealing so will do that this w'end
and just resting in place
doors off so we can detail the reveals and fit the whistlestops etc
mm
well whistlestops cleaned and fitted, sort of cleans the edge and defines it as well as doing some good
old front bumper partly refurbed and nice that it and the defo panel follow the same radius,
end caps back on, just need to drill through and secure to body
can now pop the wassher bottle back in and then refit the bashplate etc
mm
NOS or new?
Drilling after paint? I think some "in the know" syncro owners leave the screws out so that if you clip the plastic cap, it can move instead of ripping the panel.
1985 Oettinger 3.2 Caravelle RHD syncro twin slider. SA Microbus bumpers, duplex winch system, ARC 7X15 period alloys
silverbullet wrote:NOS or new?
Drilling after paint? I think some "in the know" syncro owners leave the screws out so that if you clip the plastic cap, it can move instead of ripping the panel.
well 3rd coat on and finished
nice texture to it
and closer
real stealth bleck
i have some i applied over a year ago and its been outside and not suffered and the stell will bend and the coating bemds with it, no cracking.
so whilst not the same as a step mat,it does do away with the issue of crap getting under the mat and then rubbing in as the step is used ,plus ingress from under etc. this at least is very durable , flexible ,overcoatable at will, and i think is a better soloution, ok i could use a mat as a template if desired but i figured that as its only seen when the door is open then i would go for protecting the area that boots etc most readily contact, especially the outer radius
mm