Track control replacing
Moderators: User administrators, Moderators
-
KINGPRAWN
- Registered user
- Posts: 888
- Joined: 29 Jul 2010, 15:38
- 80-90 Mem No: 9516
- Location: penzance cornwall
Track control replacing
Could anybody advise me as to the proceedure of removing the N/S TRACK CONTROL ARM .... Can I do it on my back on the drive ... Or am I going to get stuck !!! ????
in too deep to quit now....
-
Aidan
- Trader
- Posts: 7099
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: Track control replacing
Bentley manual mate it's all in there
much more doable with early pressed arms, need a trolley jack and axle stands and ideally
a second pair of hands, big bar, and ratchet strap at times, do anything else you can that might need doing in the not so distant whilst it's all apart, eg refurb driveshaft, service difflock, brake fixed lines etc...
plusgas and patience with stuff that's not been apart for along while
much more doable with early pressed arms, need a trolley jack and axle stands and ideally
a second pair of hands, big bar, and ratchet strap at times, do anything else you can that might need doing in the not so distant whilst it's all apart, eg refurb driveshaft, service difflock, brake fixed lines etc...
plusgas and patience with stuff that's not been apart for along while