temp gauge

Post by **yogi** » 30 Jul 2006, 14:39

hello everyone, temp gauge has just decided to stop, no warning, working fine for ages, then never came on when i started her up and hasnt worked since, is this a common problem, and whats the likely fault please? also do you all get a bit of gurgling noise from the rad when youve turned off?

Post by **T'Onion** » 30 Jul 2006, 15:47

Check the fuse and the wires that got to the sensor ..

as for the gurgling, sounds like you have air in the system or a leak somewhere, are you using any coolant ?

Post by **blurb55** » 30 Jul 2006, 17:42

Hi Yogi,

just been through this one last week:

Mine has never worked do it was a case of hunt the fault.

Look though this post it has loads of helpful stuff from a number of good folks:

http://www.club80-90.co.uk/forum/viewtopic.php?t=9943

and this one:

http://www.club80-90.co.uk/forum/viewtopic.php?t=10001

happy to pass on anything I learned, my number is in the helplist

Cheers, Paul.

Post by **yogi** » 01 Aug 2006, 16:57

thanks for replies, before i got the chance to check anything out, bless me it just started working again! will see what transpires, mark its not used any coolant as far as i can see, at least levels in bottles havent dropped any, am going to do anti freeze change in next couple of weeks, will see if that cures it insomuch as gettin any air out

Club 80-90 Forums

temp gauge

temp gauge

Temp Gauge