Stud length Merc 17 inch

All things round and their alignment to your direction of travel

Moderators: User administrators, Moderators

Post Reply
User avatar
zed
Registered user
Posts: 194
Joined: 09 Jan 2010, 23:08
80-90 Mem No: 9584
Location: Bolton

Stud length Merc 17 inch

Post by zed »

Please, Can anyone out there tell me what length of extended studs work with 17" 7.5j Merc' alloys? Will be putting 6mm spacers on the front. The wheels are OZ, possibly AMG.
Thanks.

User avatar
zed
Registered user
Posts: 194
Joined: 09 Jan 2010, 23:08
80-90 Mem No: 9584
Location: Bolton

Re: Stud length Merc 17 inch

Post by zed »

Ok just incase anyone else is daft enough to put 17" 8j :shock: merc alloys on.

I put 60mm stud conversion on front and rear. 10mm spacers up front, 12mm on the rear. Had to grind the lip off edge of the upper front wishbones.

Speedo matches the sat nav so now accurate. The front tyres are just peeping out of the wheel arch but no tread showing.

I found that different tyres have different widths mid way up the wall. The pirellis I have were closer to touching the upper wishbone than the two economy brand tyres so I put the pirellis on the back. I am running 225-55-17's with a 97 load rating.

If I had the choice I would have gone for a 7 or 7.5 j rim, but I got these almost free. I probably have about 15mm clearance between the tyre wall and the upper wishbone.

Biggest surprise is the comfort on the ride and the positive yet still relatively light steering.

Hope this helps someone else.

kit
Registered user
Posts: 2122
Joined: 17 Jan 2007, 21:01
80-90 Mem No: 4170
Location: Southampton

Re: Stud length Merc 17 inch

Post by kit »

Any photos?
1y Tin top rust collector.

User avatar
zed
Registered user
Posts: 194
Joined: 09 Jan 2010, 23:08
80-90 Mem No: 9584
Location: Bolton

Re: Stud length Merc 17 inch

Post by zed »

Will get some at the weekend

Post Reply