16" drums max measurement

[lloydy]

I have a set of 16" drums that i'm cleaning up, before i spend too much time on them is there a maximum dimension or wear limit?
They have a very slight lip on them, maybe 1mm..
So if someone has the new vs max worn dimensions i'd be a happy man
thank yoo

[max and caddy]

Bet it says it on them...

[lloydy]

Alright, alright. had no idea it would be written on them.
Max diameter 10.69"

[max and caddy]

That's the one.. I would grind the lip off using a angle grinder and a flap disc...just the lip..don't you into the shiney bit..makes it possible to whip the drums off to clean without having to wind the adjuster back each time.

[mrhutch]

so go on... are they within spec?

[lloydy]

Well, my d*#k won't fit in so its definitely less than 10.8"..

[Simon Baxter]

But that's longer than your legs Lloyd.

[mrhutch]

[lsidir]

I am confused, are you asking about diameter or thickness?

For new discs the thickness is 16mm and the wear limit 13-14mm

[lloydy]

But that's longer than your legs Lloyd.

It's a cross I have to bear....

[lloydy]

I am confused, are you asking about diameter or thickness?

For new discs the thickness is 16mm and the wear limit 13-14mm

This is for the rear drums

[lsidir]

ooopsss sorry:)

did not had enough coffee yet!

[lloydy]

out of spec, measure up dead on the wear limit. They are coming up nice and clean though, pics on me build thread

[max and caddy]

I would use them at that...it is also possible to get shoes relined by brake specialists with over sized friction material....obviously there is a point where safety becomes a factor but its possible..