Coil pack

An alchemy of sparks, copper wire and earth

Moderators: User administrators, Moderators

Locked
jedijeff
Registered user
Posts: 1
Joined: 10 Mar 2014, 13:47
80-90 Mem No: 0

Coil pack

Post by jedijeff »

A bit of advice please. I broke down the other night and had to be recovered home. After lots of head scratching and a new coil pack later (which I may not have needed) it was a wire to the coil pack that was preventing a spark, just by trial and error all I did was unplug a wire to the coil pack turn it around re-connect and hey presto , sparking again. Now do I just leave it and carry on as normal ? Or should there be something else I do? Any advice will be much appreciated.

California Dreamin
Registered user
Posts: 2673
Joined: 03 Apr 2007, 12:54
80-90 Mem No: 8386
Location: Nottingham

Re: Coil pack

Post by California Dreamin »

???unplug a wire to the coil pack turn it around re-connect and hey presto???

Either the wire was connected correctly or not? or could you be suggesting that the connection was poor? loose or corroded?

All I can say is make sure these connections are clean and tight and the wires are not corroded or partially broken.

Martin
1989 California 2.1MV

Locked