Hi,
Ive gone to do the clutch master cylinder, so I started by checking I could bleed at the slave cylinder but don't seem to have a spanner to fit.... does anyone know what sixe it is please?
whats size spanner for clutch slave cylinder
Moderators: User administrators, Moderators
-
Rust Bucket
- Registered user
- Posts: 35
- Joined: 17 Feb 2010, 18:43
- 80-90 Mem No: 11384
- Location: Northumberland
Re: whats size spanner for clutch slave cylinder
I think its 7mm same as the brakes 
1990 VW T25 2.0 gti Tin Top
-
Oldiebut goodie
- Registered user
- Posts: 7482
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Re: whats size spanner for clutch slave cylinder
A spanner is bound to wring it off - I always use a box spanner and make sure that pressure is put on by evenly pulling and pushing the bar at the same time. 7mm when I did mine.
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶