Just got my fridge out of the van as it wasnt performing well and noticed the flue looked like this which looks wrong to me....
https://www.dropbox.com/s/dpvobvqhhje4rh3/flue.JPG
Also does the fan stay on all the time its on gas/elec or just when it gets hot?
rm184 fridge flue
Moderators: User administrators, Moderators
rm184 fridge flue
1984 1.9 petrol wbx DH with a pierburg carb , LHD westfalia club joker.
-
- Registered user
- Posts: 232
- Joined: 01 Nov 2009, 18:49
- 80-90 Mem No: 7945
- Location: London
Re: rm184 fridge flue
Looks like original Westy to me. That hose is held on to the flue with the self tapper you can see there. Should be another screw at the other end where it joins the outlet fitting.
As the fan - in theory it should just come on when it gets hot. Mine seems to be on most of the time in the summer, something like 50 seconds on then 10 secs off and so on but I reckon my thermoswitch is faulty and it should not be on so often.
As the fan - in theory it should just come on when it gets hot. Mine seems to be on most of the time in the summer, something like 50 seconds on then 10 secs off and so on but I reckon my thermoswitch is faulty and it should not be on so often.
1983 Westy Joker HighTop, 1Z TDI Conversion
-
- Registered user
- Posts: 232
- Joined: 01 Nov 2009, 18:49
- 80-90 Mem No: 7945
- Location: London
Re: rm184 fridge flue
On second thoughts after comparing pic with mine - not sure if the top of your flue is bent too much leaving a big gap in the side facing the fridge.
Just have pic of mine from a while ago here so can't get better angle on it. Looks like there is a slight kink in it but can't see if there is a gap or not. Best wait for other peoples opinion as if yours is letting fumes out there which should be vented outside it could be dangerous.
Just have pic of mine from a while ago here so can't get better angle on it. Looks like there is a slight kink in it but can't see if there is a gap or not. Best wait for other peoples opinion as if yours is letting fumes out there which should be vented outside it could be dangerous.
1983 Westy Joker HighTop, 1Z TDI Conversion
Re: rm184 fridge flue
yeah mine looks a bit bent - perhaps i bent it pulling the fridge out!
i can bend it back easy enough but would be good if someone could verify thats the right thing to do...
think my fan is caput as i tried connecting 12v to it and nothing, come to think of it i havent ever heard it come on...
i can bend it back easy enough but would be good if someone could verify thats the right thing to do...
think my fan is caput as i tried connecting 12v to it and nothing, come to think of it i havent ever heard it come on...
1984 1.9 petrol wbx DH with a pierburg carb , LHD westfalia club joker.
-
- Registered user
- Posts: 232
- Joined: 01 Nov 2009, 18:49
- 80-90 Mem No: 7945
- Location: London
Re: rm184 fridge flue
Will see if I can get pic though the side vent as my fridge is all bolted in.
The fans tend to seize up and many people here myself included have replaced them with computer case fans attached to the fins.
The fans tend to seize up and many people here myself included have replaced them with computer case fans attached to the fins.
1983 Westy Joker HighTop, 1Z TDI Conversion
-
- Registered user
- Posts: 232
- Joined: 01 Nov 2009, 18:49
- 80-90 Mem No: 7945
- Location: London
Re: rm184 fridge flue
pirate-pete wrote:Will see if I can get pic though the side vent as my fridge is all bolted in.
Sorry - vent is too high to get photo through but I do reckon you need to bend the thing back again to close that gap.
1983 Westy Joker HighTop, 1Z TDI Conversion
Re: rm184 fridge flue
cheers for trying - yeah think i'll bend it back and hope for the best!!!
i have a CO alarm fitted next to the vent just in case!
i have a CO alarm fitted next to the vent just in case!
1984 1.9 petrol wbx DH with a pierburg carb , LHD westfalia club joker.