Ok here is the problem.
Having emptied the coolant out my van. Flushed it all through etc. I have now discovered that the bleed screw at the top of the radiator just turns, it doesn't undo or do up. Bollox.
So my question is A) can I bleed the system without undoing that screw. B) how.
It's really annoying as everything else service wise has been great.
Help always appreciated.
Radiator bleed screw
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 172
- Joined: 24 Feb 2012, 22:36
- 80-90 Mem No: 10742
- Location: Plymouth
- Contact:
Radiator bleed screw
Dave.
1986 watercooled 1.9DG
1986 watercooled 1.9DG
- ghost123uk
- Registered user
- Posts: 6857
- Joined: 10 Mar 2006, 10:15
- 80-90 Mem No: 2585
- Location: John in Malpas, in the very S. W. part of Cheshire.
- Contact:
Re: Radiator bleed screw
If the bleed bolt at the top of the left side of the rad will not tighten up, you have a problem. If the bolt is loose your system cannot work, the coolant will leak out !
The radiator will have to come out and the thread for that bolt attended to (Helicoil or similar).
The radiator will have to come out and the thread for that bolt attended to (Helicoil or similar).
Got a new van, but it's a 165bhp T4 [shock horror] Accurate LPG Station map here