itchyfeet wrote:When i was quite young i remember my first ride in a T3, it was quite an young van also, i was so excited but it was a bit embarrasing really becuase every time i got out it made a sort of farting noise from the lower bush
it's never happened with any of my later vans
Bush farting is just not a cool sound when demounting.
itchyfeet wrote:When i was quite young i remember my first ride in a T3, it was quite an young van also, i was so excited but it was a bit embarrasing really becuase every time i got out it made a sort of farting noise from the lower bush
it's never happened with any of my later vans
Bush farting is just not a cool sound when demounting
Easily avoidable by liberally applying a proprietary lubrication (Castrol R smells nice) to said bush before mounting it in the desired location, as mentioned before due to the extra thickness of German bushes they may need an extra application.
itchyfeet wrote:When i was quite young i remember my first ride in a T3, it was quite an young van also, i was so excited but it was a bit embarrasing really becuase every time i got out it made a sort of farting noise from the lower bush
it's never happened with any of my later vans
Bush farting is just not a cool sound when demounting
Easily avoidable by liberally applying a proprietary lubrication (Castrol R smells nice) to said bush before mounting it in the desired location, as mentioned before due to the extra thickness of German bushes they may need an extra application.
I think the problem was the bushes were too tight becuase this was a newish van and the bushes were pre loaded with too much lubrication back then
kevtherev wrote:
Bush farting is just not a cool sound when demounting
Easily avoidable by liberally applying a proprietary lubrication (Castrol R smells nice) to said bush before mounting it in the desired location, as mentioned before due to the extra thickness of German bushes they may need an extra application.
I think the problem was the bushes were too tight becuase this was a newish van and the bushes were pre loaded with too much lubrication back then
I can just about remember when bushes used to be self lubricating, I think back then the insertion of the giggle pin used to be much more straight forward affair, nowadays I'm just as happy to have a cup of tea and pay a mechanic to do it for me
Interesting reading here for all those with a potentially faulty giggle pin.
I don't think its been noted yet that the giggle pin can often soften considerably during this very cold weather. Had a quick look in the Haynes and the Bentley, both recommended a brisk rub-down by hand before insertion.
Hope this helps the general mass debate on the subject....
T25Convert wrote:Interesting reading here for all those with a potentially faulty giggle pin.
I don't think its been noted yet that the giggle pin can often soften considerably during this very cold weather. Had a quick look in the Haynes and the Bentley, both recommended a brisk rub-down by hand before insertion.
Hope this helps the general mass debate on the subject....
Cheers,
Alex
You strike me as a bloke with experience of giggle pin rubbing Alex.
What do you use to rub it with?
Warming the bush before hand for 10-20 minutes can help get things moving.
This doesn't work both ways - I wouldn't recommend putting the giggle pin in the freezer before insertion for example - you will get far to much shrinkage then and you'll never get the thing in..
kevtherev wrote:
You strike me as a bloke with experience of giggle pin rubbing Alex.
What do you use to rub it with?
I'm going to use an old sock.
TBH most rubbing was carried out historically, bit out of practice.
Consulting the Bentley again to refresh my memory, suggests that Tool VW301.230.321/A is used, along with safety goggles. Can't find the original tool anywhere, but the Haynes is useful as it suggests that a sheet of high strength tissue paper may be a suitable alternative, but notes that this is a rare instance where reassembly is not the reverse of removal... Food for though I think.
I have just received an email in my spam folder that offers a chemical treatment for giggle pin faults that promises to extend their working life, and the now defunct Formula1 Hispania Racing Team experimented with a chemical intervention for the dry fuffle valves.
you asked for that 
