Front end strip down

[Dazco]

Ill be replacing the front discs, bearings , track rod ends and steering rack gators in the next couple of weeks. While I'm at it what other bushes etc are worth replacing .thanks , Daz

[Aidan]

radius rod bushes probably need doing if original

[steve8090]

Upper wishbone bushes if you have a mouse living under you seats

[kevtherev]

Brake flexi hoses

[Plasticman]

and the clips for the flexis

[Dazco]

No mice and flexis were replaced last year.
Ill look at radius arm bushes. Thanks very much

[CovKid]

Drop link and anti roll bar bushes.

[kevtherev]

Drop link and anti roll bar bushes.

Poly bush or Standard.. you decide

[Dazco]

Ill start making another list
Poly bush v standard , now that's a good question

[hakuna matata]

Top and Bottom ball joints !!

neil.

[Dazco]

Hiya Neil, I'm thinking now of stripping it down then buying any extras I need. Will meen bring off the road a bit longer , but then I know I'll be getting what I need. Doesn't the lower ball joint need a fairly hefty press for removal and refitting ?

[hakuna matata]

Hiya Neil, I'm thinking now of stripping it down then buying any extras I need. Will meen bring off the road a bit longer , but then I know I'll be getting what I need. Doesn't the lower ball joint need a fairly hefty press for removal and refitting ?

just to let you know I am doing the same job to my van and gona replace the whole lot , after 25 years , she need a little TLC, but re the lower ball joint yes a big press , but i have a friend who works at Merc trucks who have a press, so he,s gona sort that out for me .

[Dazco]

Ha , it's allright for some

[988mick]

use poly bushes on the steering rack it will improve the steering for only a few quid extra.