two cylinder problem fixed?

Big lumps of metals and spanners.

Moderators: User administrators, Moderators

Locked
bananavan
Registered user
Posts: 0
Joined: 22 Nov 2013, 13:25
80-90 Mem No: 0

two cylinder problem fixed?

Post by bananavan »

I had my t25 serviced in Spain and from what I can gather, with my limited Spanish, it is supposed to be running fine. The problem was a carb miss tuning. The engine rocked back and forth previously and seems much more balanced.

The mechanic disconnected a hose that went from the engine block to the carb (I have a dual barrel 'Racing carb') and explained it was better the air went to the "calle" or road. Is this advisable?

When I rev the engine without the clutch engaged it seems strong, but when in gear I get a strong burning smell when first setting out and then it disappears, but it seems I still do not have as much power as when it is not in gear. Could my clutch be going. I don't want to be in the middle of nowhere and not have it working.

Sorry for all the questions and my lack of knowledge. Your help is much appreciated.

Bananavan

User avatar
kevtherev
Registered user
Posts: 18832
Joined: 23 Oct 2005, 20:13
80-90 Mem No: 2264
Location: Country estate Wolverhampton Actually

Re: two cylinder problem fixed?

Post by kevtherev »

Aircooled or watercooled
what size engine
what carb model?
AGG 2.0L 8V. (Golf GTi MkIII)

bananavan
Registered user
Posts: 0
Joined: 22 Nov 2013, 13:25
80-90 Mem No: 0

Re: two cylinder problem fixed?

Post by bananavan »

Aircooled 2ltr liter t25

http://i1316.photobucket.com/albums/t60 ... 5d0f29.jpg" onclick="window.open(this.href);return false;

http://i1316.photobucket.com/albums/t60 ... dcbb73.jpg" onclick="window.open(this.href);return false;

What the mechanic suggested is I just disconnect the hose from the engine block while keeping it connected to the Carb and route the hose down to disperse on the 'calle' or road.
Last edited by bananavan on 27 Nov 2013, 08:09, edited 3 times in total.

User avatar
kevtherev
Registered user
Posts: 18832
Joined: 23 Oct 2005, 20:13
80-90 Mem No: 2264
Location: Country estate Wolverhampton Actually

Re: two cylinder problem fixed?

Post by kevtherev »

VW didn't do an 1800 t25.
use a host to post pictures..photobucket.com will do
AGG 2.0L 8V. (Golf GTi MkIII)

bananavan
Registered user
Posts: 0
Joined: 22 Nov 2013, 13:25
80-90 Mem No: 0

Re: two cylinder problem fixed?

Post by bananavan »

Kev the Rev suggested I had a problem with the braided hose that goes to the brake servo when I had problems with compression in my two left cylinders.

The front brakes are binding slightly. I start out and I can smell them burning and then it goes away. Could this be a realted problem?

Thanks for your help

User avatar
AdrianC
Registered user
Posts: 2975
Joined: 29 Dec 2010, 21:57
80-90 Mem No: 9144
Location: Living in Hay whilst the Sun pours down.
Contact:

Re: two cylinder problem fixed?

Post by AdrianC »

bananavan wrote:Kev the Rev suggested I had a problem with the braided hose that goes to the brake servo when I had problems with compression in my two left cylinders.

So that's the crankcase breather that he's dangled. Instead of oily vapours going into the air filter, then being burnt, they're now being thrown straight out onto the road. If that makes a significant difference to the running, then you've most likely got bad internal engine wear.

Image
Image

The front brakes are binding slightly. I start out and I can smell them burning and then it goes away. Could this be a realted problem?

No. You need to dismantle, clean and lubricate the front calipers. If that doesn't help, then maybe the front flexi hoses are knackered, but the calipers just being gunked up are more likely.
A year and a half living in a Westy hightop... http://www.WhereverTheRoadGoes.com" onclick="window.open(this.href);return false;

Locked