.I've never tested the circuit prior to any changes I've made, so it could be a result of my workmanship
or it has always been faulty?Any pointers appreciated, (before I start peeling back the heat-shrink on my extension).
Cheerz
'Un-heated' front seat
Moderators: User administrators, Moderators
-
Yozza
- Registered user
- Posts: 45
- Joined: 15 Oct 2008, 19:28
- 80-90 Mem No: 6195
- Location: Stoke-on-Trent
'Un-heated' front seat
I have had to extend the electrical seat loom to reach the drivers seat (originally a LHD). However, when I fired up the motor and went to turn up the heat - nothing, not even luke! Checked the voltage from the loom (where it connects to the seat) and only 1v was showing .
I've never tested the circuit prior to any changes I've made, so it could be a result of my workmanship or it has always been faulty?
Any pointers appreciated, (before I start peeling back the heat-shrink on my extension).
Cheerz
.I've never tested the circuit prior to any changes I've made, so it could be a result of my workmanship
or it has always been faulty?Any pointers appreciated, (before I start peeling back the heat-shrink on my extension).
Cheerz
T25 '90 2.1i 16" Doka
JCB 3C MkII
Thwaites 6000
JCB 3C MkII
Thwaites 6000