2.1 MV oil in the water

Big lumps of metals and spanners.

Moderators: User administrators, Moderators

Locked
Bullifamilie
Registered user
Posts: 9
Joined: 16 Mar 2009, 02:03
80-90 Mem No: 0
Location: Perth Western Australia

2.1 MV oil in the water

Post by Bullifamilie »

I picked up a camper a couple of months back where the guy was totally fed up with it. He'd rebuilt the engine (2.1MV) the year before and was heartbroken to find oil in the water. I picked it up cheap thinking it's probalby a burst oil cooler as I've had that a few times, an easy fix and happy days.

Anyway it turns out the oil cooler wasn't connected, so that's not the reason. After leaving it on the drive for 6 weeks it didn't fix itself so I checked the compression today and it's good, 150PSI 'ish across the board, the engine runs reasonable, but it is slowly pumping oil into the coolant.

I can only think it's leaking thru the bottom liner seal, I can't see where else it can get in and it kinda makes sense witha fairly recent re-build.

Does anyone out there agree with me or is it likely leaking somewhere else?

User avatar
Ian Hulley
Registered user
Posts: 12661
Joined: 11 Oct 2005, 08:08
80-90 Mem No: 1323
Location: Wirksworth, Derbyshire ... or at t'mill

Re: 2.1 MV oil in the water

Post by Ian Hulley »

Manual or Auto ?

Ian
The Hulley's Bus
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure

Bullifamilie
Registered user
Posts: 9
Joined: 16 Mar 2009, 02:03
80-90 Mem No: 0
Location: Perth Western Australia

Re: 2.1 MV oil in the water

Post by Bullifamilie »

Good thought, but it's manual.

User avatar
ghost123uk
Registered user
Posts: 6855
Joined: 10 Mar 2006, 10:15
80-90 Mem No: 2585
Location: John in Malpas, in the very S. W. part of Cheshire.
Contact:

Re: 2.1 MV oil in the water

Post by ghost123uk »

Bullifamilie wrote: Does anyone out there agree with me or is it likely leaking somewhere else?

Sadly I agree with you = been there done that :twisted:

Image

:run
Got a new van, but it's a 165bhp T4 [shock horror] Accurate LPG Station map here

Bullifamilie
Registered user
Posts: 9
Joined: 16 Mar 2009, 02:03
80-90 Mem No: 0
Location: Perth Western Australia

Re: 2.1 MV oil in the water

Post by Bullifamilie »

Spanners out then.

User avatar
AdrianC
Registered user
Posts: 2975
Joined: 29 Dec 2010, 21:57
80-90 Mem No: 9144
Location: Living in Hay whilst the Sun pours down.
Contact:

Re: 2.1 MV oil in the water

Post by AdrianC »

Bullifamilie wrote:Anyway it turns out the oil cooler wasn't connected, so that's not the reason.

but it is slowly pumping oil into the coolant.

Actively pumping oil in? How do you know?

I'm wondering if the cooler did die, the cooling system's really oily inside, and that's why new coolant's getting oily - just residue. There's a LOT of pipework to be clagged internally...
A year and a half living in a Westy hightop... http://www.WhereverTheRoadGoes.com" onclick="window.open(this.href);return false;

User avatar
ghost123uk
Registered user
Posts: 6855
Joined: 10 Mar 2006, 10:15
80-90 Mem No: 2585
Location: John in Malpas, in the very S. W. part of Cheshire.
Contact:

Re: 2.1 MV oil in the water

Post by ghost123uk »

AdrianC wrote:
Bullifamilie wrote:Anyway it turns out the oil cooler wasn't connected, so that's not the reason.

but it is slowly pumping oil into the coolant.

Actively pumping oil in? How do you know?

I'm wondering if the cooler did die, the cooling system's really oily inside, and that's why new coolant's getting oily - just residue. There's a LOT of pipework to be clagged internally...

Very good point Adrian, after fixing mine (long story) it took at least 10 flushes before it was clear(ish). I got to be very efficient at draining, re-filling and bleeding :twisted:
Got a new van, but it's a 165bhp T4 [shock horror] Accurate LPG Station map here

Bullifamilie
Registered user
Posts: 9
Joined: 16 Mar 2009, 02:03
80-90 Mem No: 0
Location: Perth Western Australia

Re: 2.1 MV oil in the water

Post by Bullifamilie »

The oil cooler although present was never attached. The guy originally had a 1.9 Engine without oil cooler. He used the water pipework, ECu, wiring, etc from the 1.9 and installed the later 2.1MV engine.

I've flushed it out 4 times now, I know what you mean abut oil residue, it's the sort of thing I was hoping for but it isn''t getting any better.

Locked