exhaust
Moderators: User administrators, Moderators
-
Dynamite-dindin
- Registered user
- Posts: 88
- Joined: 20 Sep 2012, 18:02
- 80-90 Mem No: 0
- Location: Salisbury
exhaust
hi can anyone suggest what exhaust to use on the aaz engine I will make a pipe from manifold but what rear silencers will fit
Danny
1985, AAZ, Panel van
1985, AAZ, Panel van
-
Oldiebut goodie
- Registered user
- Posts: 7484
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Re: exhaust
It depends upon how much work you want to do.
Here's the one that I made up for my 1Y - the temporary bands are now gone and the mounting brackets are welded to the silencer. I have also cut open the silencer and re-packed it in an effort to quieten it - not much quieter but am not going to do it again.
(original, upon opening it, was packed very tightly, too tightly I think as you could see that the packing wasn't allowing the exhaust to breathe into it.)
I just had one made the same size as the original JX/CS measurements - £65. Silencer OK, packing not so good.
Here's the one that I made up for my 1Y - the temporary bands are now gone and the mounting brackets are welded to the silencer. I have also cut open the silencer and re-packed it in an effort to quieten it - not much quieter but am not going to do it again.
(original, upon opening it, was packed very tightly, too tightly I think as you could see that the packing wasn't allowing the exhaust to breathe into it.)I just had one made the same size as the original JX/CS measurements - £65. Silencer OK, packing not so good.
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶