brickwerks 3 point belt kit problem

[badgerfax]

Hi can anyone help out?

I am trying to fit 3 point belt kit from Brickwerks but am having problems

The belt wont come out for one and the more I fiddle with it the more gets wound in. this is driving me mad
Is this a user error or a dodgy belt

I have a westy so all the anchor points are there but there's no fitting instructions so I haven't a clue which bolts and numerous washers should go where for a safe install.

If anyone could point me in the direction of a previous "how to" i'd be grateful as my searches have turned up nowt.

Off to swear some more now

[AdrianC]

The belt wont come out for one and the more I fiddle with it the more gets wound in. this is driving me mad
Is this a user error or a dodgy belt

Unbolt the reel, and try to wind it out gently, with the reel at various angles - the doofy that stops it from winding out in a crash is position-dependent, and if it's mounted on the wonk, it can cause problems.

[badgerfax]

Hi Adrian, Yep trying this as we speak & been at it for a while now. Belt is straight out the pack and has not come out at all however gently or whatever angle I try at.

Does make me wonder if I have a duff one.

Do like to try & work things out but this has got me right bent out of shape

[trucker]

Fitting guide http://www.brickwerks.co.uk/rear-seat-belts" onclick="window.open(this.href);return false;

[badgerfax]

Ok so I've tapped it on the sides and the mechanism had freed off so the belts playing out now.

Thanks Trucker, just what I was looking for. Kept following links to a dead page before