Hi all
My gearbox had started clunking out of 4th gear - discovered that was hardly any oil in it, so refilled and now running fine - just did 3 hour round trip in it and no clunking, though is whining a little.
Still generally resigned to fact that will need replacing soon. I can't afford a rebuild, so ideally would like to buy good scrapped replacement. Problem is I'm not sure exactly what gearbox it would be, so wonder if someone could help?
Originally it was a 1.6TD, but this was a replaced with the 1.9TD AAZ, with the gear box being changed from the 5 speed to a 4 speed at the same time. Therefore is there just one gearbox that can be used for this conversion, or could it be from a selection? Or are there any codes I can look for on the box?
Unfortunately I can't ask the folk that did the conversion as I had it done while in Poland about 7 years ago.
Identifying gearbox?
Moderators: User administrators, Moderators
-
polish van ben
- Registered user
- Posts: 52
- Joined: 12 Apr 2008, 16:34
- 80-90 Mem No: 5120
- Location: Cardiff
-
KarlT
- Registered user
- Posts: 2958
- Joined: 28 Nov 2005, 21:39
- 80-90 Mem No: 2266
- Location: location, location.---Sunny South Devon
- Contact:
Re: Identifying gearbox?
Yeah, its the big metally thing bolted to the engine (big metally noise thing). Any help? 
-
Aidan
- Trader
- Posts: 7005
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: Identifying gearbox?
watercooled boxes the code is stamped about 4" below the reverse switch housing on the lower nearside of the main case part