Engine fitting price.

Big lumps of metals and spanners.

Moderators: User administrators, Moderators

Bluebell65
Registered user
Posts: 17
Joined: 15 May 2013, 19:32
80-90 Mem No: 12330
Location: Glasgow, Scotland

Engine fitting price.

Post by Bluebell65 »

Does anyone know a rough cost for fitting an DG Petrol engine. :?: Wee garage doing it but guy wont say price yet so getting a bit worried :? Any ideas greatly appreciated Thanks.
1984 1900DG poptop.

User avatar
Ian Hulley
Registered user
Posts: 12661
Joined: 11 Oct 2005, 08:08
80-90 Mem No: 1323
Location: Wirksworth, Derbyshire ... or at t'mill

Re: Engine fitting price.

Post by Ian Hulley »

There are so many variables it's impossible to say. Does it include removing and refitting the engine or just chucking a new complete unit in ? Does it include removing and refitting all ancillaries (EXHAUST !! water pump, hoses, fuel pump, carb etc) ? Does it include the cost of supplying and fitting a clutch, flywheel, spigot bearing ? Replacing any worn parts or leaving them for you to do later ? Bleeding the system up ?

See what I mean ?

Ian
The Hulley's Bus
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure

Bluebell65
Registered user
Posts: 17
Joined: 15 May 2013, 19:32
80-90 Mem No: 12330
Location: Glasgow, Scotland

Re: Engine fitting price.

Post by Bluebell65 »

Hey Ian thanks I see what you mean. It involves removing the old engine and refitting a remanufactured engine. He has made up a few gaskets and mentioned a few switches but other than that nothing else is getting replaced. As he said a basic out and in job ( if there is such a thing lol) :?
1984 1900DG poptop.

Dad
Registered user
Posts: 329
Joined: 23 Sep 2012, 19:27
80-90 Mem No: 11860
Location: Goring

Re: Engine fitting price.

Post by Dad »

Previous owner had one fitted with new clutch and other bits for £1050. No idea if it was a good price.
1990 autosleeper trident 1.9 lpg

User avatar
AdrianC
Registered user
Posts: 2975
Joined: 29 Dec 2010, 21:57
80-90 Mem No: 9144
Location: Living in Hay whilst the Sun pours down.
Contact:

Re: Engine fitting price.

Post by AdrianC »

Bluebell65 wrote:but other than that nothing else is getting replaced.

That he knows of. Yet.
A year and a half living in a Westy hightop... http://www.WhereverTheRoadGoes.com" onclick="window.open(this.href);return false;

Bulldog1
Registered user
Posts: 90
Joined: 29 Oct 2011, 18:03
80-90 Mem No: 10412
Location: Bolton

Re: Engine fitting price.

Post by Bulldog1 »

I paid £450.00 for old engine to be compression tested and then removed cos it was knackered. Then all ancillary items swapped over and engine tuned etc. He also put in the new clutch and thermostat housing. (I supplied thermostat housing) and a new battery.
One life, Live it!!!!

Bluebell65
Registered user
Posts: 17
Joined: 15 May 2013, 19:32
80-90 Mem No: 12330
Location: Glasgow, Scotland

Re: Engine fitting price.

Post by Bluebell65 »

Thanks all for the replies. The van has a new clutch and water pump (and radiator). I am so mechanically inept its laughable. I dont have lots of dosh but i do love my van and am determined not to give up on her lol. I have been told rust wise for her age she is in reasonable nick and also that she is my mid life crisis. ( do us woman have them :wink: ) Im hoping 700 will cover the engine and i will tackle the fuel issue myself ( No laughter please) and i may even make it to volksfling in August ..... 8)
1984 1900DG poptop.

faggie
Registered user
Posts: 1025
Joined: 10 Jan 2010, 17:10

Re: Engine fitting price.

Post by faggie »

last one i did for a friend i charged £125

Bluebell65
Registered user
Posts: 17
Joined: 15 May 2013, 19:32
80-90 Mem No: 12330
Location: Glasgow, Scotland

Re: Engine fitting price.

Post by Bluebell65 »

Hey Faggie i wish i was you friend before lol. This guy was a friend of a friend so thought i could place my trust in him. (i hope i still can) had a wee issue with my car right outside his unit yesterday and ended up walking home with my car and van keeping each other company. Gear linkage sorted in car today drove home engine light came on found long nose pliers hanging from engine and engine cover missing. ( didnt inspire me with confidence as he charged me 90 for a 10 min 25 part. friend???? lol. Thanks for the reply. :D
Did i say my middle name is lucky :rollin
1984 1900DG poptop.

User avatar
mickcorr
Registered user
Posts: 63
Joined: 02 Oct 2006, 12:42
80-90 Mem No: 2984
Location: Elgin

Re: Engine fitting price.

Post by mickcorr »

Bluebell.........

for future reference contact David Mylett Motor Engineers. He is near Thornliebank, south of Glasgow. I have used him quite a few times both for the van and my other motor when I lived in Glasgow.......he is a general motor engineer but owns and works on veedubs too. Excellent work and service.

Mick.

User avatar
Ian Hulley
Registered user
Posts: 12661
Joined: 11 Oct 2005, 08:08
80-90 Mem No: 1323
Location: Wirksworth, Derbyshire ... or at t'mill

Re: Engine fitting price.

Post by Ian Hulley »

faggie wrote:last one i did for a friend i charged £125

You actually charged a friend ? :evil: :roll:
The Hulley's Bus
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure

User avatar
pionte
Registered user
Posts: 549
Joined: 17 Oct 2009, 10:35
80-90 Mem No: 8209
Location: Tonbridge Kent

Re: Engine fitting price.

Post by pionte »

I would say 2 hours to remove the Engine, 2 hours to refit ( I can do it in this time on my own without and hoist or air tools.) Now the difficult bit removing the exhaust, this could take 1 hour or a day ! dependant on how corroded the nuts/studs are, but as you are having a recon engine refitted he wont have to worry about drilling out snapped of exhaust studs , so I would guess at another 2 hours to swap the exhaust , then dependant on what ancillaries are being swapped over , alternator, 30 mins, water pump and thermostat housing can be a real nightmare, especially if it is an early pre 85 model ( as mine is ) (I have spent countless hours re drilling and re tapping threads ), fitting carb an hour, adding coolant and bleeding system ... 1.5 hrs , tinkering 1 hr ? so 10-11 hours sounds about right at a guestimate ... im sure a garage with VW van experiance could do it a whole lot quicker !
2.5 Quad Cam Scooby engine . Westfalia California 1989

Bluebell65
Registered user
Posts: 17
Joined: 15 May 2013, 19:32
80-90 Mem No: 12330
Location: Glasgow, Scotland

Re: Engine fitting price.

Post by Bluebell65 »

Thanks Pionte that gives me a good idea whats involved and what to expect much appreciated. :ok Also thanks Mick i will be using David Mylott in future. Life is a learning experience is about all i can say now lol.
1984 1900DG poptop.

faggie
Registered user
Posts: 1025
Joined: 10 Jan 2010, 17:10

Re: Engine fitting price.

Post by faggie »

i did not charge him he paid me as a goodwill gesture as it was 100 miles from our house and i gave up my weekend and i had to make special tool to do the job

Bluebell65
Registered user
Posts: 17
Joined: 15 May 2013, 19:32
80-90 Mem No: 12330
Location: Glasgow, Scotland

Re: Engine fitting price.

Post by Bluebell65 »

Lesson learned here. Go to a VW friendly garage every time. Cost ended at £830. She is home now with oil leak, cutting out and not bled. Not a happy bear lol :(
1984 1900DG poptop.

Locked