Washer

[Cherryboo]

Hellooooooooo
Any ideas why my washer would not be working please?
It has water in it and wipers work ok but no washer!!!
Thanks
Cherryboo x

[Ralf85]

Could be a couple of things.
1) Blockage of the water jets. A pin inserted gently into a jet will show if that is the problem.
2) If the washers were working until recently then it's probably the electric washer pump - either the connections are corroded or the pump is kaput. Check the connections first.

[jason k]

Check the switch contacts aren't full of fluff and crud, its visible by the steering wheel.

[Cruz]

Check the switch contacts aren't full of fluff and crud, its visible by the steering wheel.

WHS^^^^^

Mine stopped working. I removed the reservior and found the pump was fine then I removed the steering wheel cowling and used a combination of switch cleaner from maplin, a cotton bud and a fine nail file board and cleaned up the contact. Works fine now

[Cherryboo]

How do i get to the motor to see if its ok?????

[Mr Soft]

You will need to drop the washer bottle from under the left hand side of your van. I blocked up under the bottle as it was quite full, then slackened off all retaining bolts & the filler neck, gradually lowering it on to the blocking. Once off I tested the pump & found it was ok!! Eventually found that the switch contact was dirty!!

Bob