fitting a passat engine

Post by **pete-binni** » 27 May 2013, 08:39

been offerd a yreg passat tdi told its a 130bhp its all running and complete what would i need to fit it would my turbo diesel parts off my engine work mounts ect and what wireing would i need to do ????

Website · Post by **CovKid** » 27 May 2013, 09:32

This really belongs in 'Alternative Engines' forum

Post by **syncroandy** » 27 May 2013, 20:47

None of the JX bits are any use to you. Would have to be fitted upright with adapter plate or using $$ kit from the US. ECU will use can-bus so you'd have incorporate the clocks. All doable if you have the time/money.

Post by **pete-binni** » 27 May 2013, 21:13

ok that is what i am looking for think a aaz is the way forward i dont have the time to pi$$ about as got a splitscreen and a heinkel to do as well

Post by **max and caddy** » 31 May 2013, 21:34

Bomber or car?

Post by **si&helen cali89** » 02 Jun 2013, 17:38

do you know the engine code of the donor if its a afn it can be done as i have one in my bus same engine in passat and audi a4

Post by **Oldiebut goodie** » 02 Jun 2013, 20:38

AFN is a lot lower on horses than 130 I believe. 110ish?

Post by **si&helen cali89** » 03 Jun 2013, 18:23

it might have been remapped to 130

Post by **Oldiebut goodie** » 03 Jun 2013, 18:53

In which case a boy racer has had it and it will be scrap.

Post by **trucker** » 03 Jun 2013, 19:30

max and caddy wrote:Bomber or car?

Club 80-90 Forums

fitting a passat engine

fitting a passat engine

Re: fitting a passat engine

Re: fitting a passat engine

Re: fitting a passat engine

Re: fitting a passat engine

Re: fitting a passat engine

Re: fitting a passat engine

Re: fitting a passat engine

Re: fitting a passat engine

Re: fitting a passat engine