Clutchy pipey on a latey vany

[dbz864]

Hi,ive looked through prev posts! Where my white plastic pipe connects to the metal pipe (chassis) has rusted away,leaking fluid.Looked on bricky werks site the only thing i can see is a braided pipe conversion,which is 45+ odd quid plus pp.Does anybody know a cheaper way?Thanks

[tommin]

Ah just had the same problem, ordered some piping from these guys on ebay. Measure what the length you need, mine was 3m, they will cut whatever size you need and at a good price. Get the Cupro Nickel pipe, better than copper.

http://stores.ebay.co.uk/Clarik-Enginee ... 34.c0.m322" onclick="window.open(this.href);return false;

[dbz864]

Thanks , did you use copper straight to the cylinder?What size connectors did youuse?thanks

[kevtherev]

Just to add Brickwerks do the pipe with all the fittings

[tommin]

I used same fittings, and no not copper, kunifer pipe between the two plastic pipes, why waste good fittings As for Brickwerks, dig deep lol

[dbz864]

yeh i checked brickwerks,but they only list braided at £45 +pp. ^^^^^^Thanks, So you used the couplings that were already on the van?As Mine are shot.

[tommin]

There are plenty on ebay, some will sell you both, pipe and fittings, you should have no problems there! Good luck.