shocker lengths, 2wd + springs -40mm

[Plasticman]

im looking for the open and closed length of std front and rear shocks
also with regard to springs i need the free length of front and rears at -40mm and also wire diameter
mm

[boxer]

I could do with the standard length for front and back is anyone has them?

[Plasticman]

seems we are both meeting utter silence
mm

[CovKid]

If you hang on, I'm about to replace mine so can give you dimensions on Saturday if thats any use? Just the back ones mind, but its a start. Will measure new and old for you.

[Plasticman]

saturday will be fine.
would have thought there would be a reference list some place with std lengths etc
mm

[boxer]

Any joy?

[CovKid]

2 shakes, looking for tape measure.

[CovKid]

Back ones, centre of pin to centre of pin (ie fully shut):
33.5cm
Extended (ie complete max stretch):
53cm

You might see a 1/2 cm -1 cm difference between makes but that would seem to be the stock lengths for rear shocks.

[Plasticman]

thanks for that , dont fancy whipping your fronts off dom you
mm

[CovKid]

To be honest, I was going to do the fronts but Mercdoctor doesn't have a spring compressor anymore so that job will have to wait. Don't fancy using a crowbar and ducking!