Eber Tee Piece

[billybigspud]

Would this be the correct size for teeing in the fuel line for an eber. I have had a search and some say 7mm and some say 8mm. It is for a 2.0 a/c

http://www.ebay.co.uk/itm/FUEL-LINE-Tee ... 2a2850844f" onclick="window.open(this.href);return false;

If not, where could I get one from?

Ta

[Oldiebut goodie]

It depends upon where in the fuel line you are tapping and the inside diameter of your fuel line at that point and the outside diameter of your Eberspächer fuel line. I have one here 8mm x 8mm x 4.5mm. You may well need 7 x 7 x 4/4.5mm. Eberspächer and Webasto fuel lines tend to be 4/4.5mm unless you have a 5Kw or so heater. I use 3.5/4mm jointing hose to give a tight fit. That one that you have linked to is a bit of overkill - there is no need for that scale of engineering! (and wrong outlet size)
Time to do some measuring!

[Oldiebut goodie]

Here is a 8mm 4mm 8mm T piece. http://www.ebay.co.uk/itm/8mm-4mm-REDUC ... 3a54cd11d6

[billybigspud]

Thanks for the help.

I am going to tee in just after the petrol tank. All the fuel lines are in good condition but look a bit of a mish mash so I think I am going to sort them out anyway. I will be able to have a proper measure then.