Fitting Steering Rack Poly Bushes

[RobH]

How easy a job is this?
Any special tools or patience required?
Any tips or a pictoral how to thread I can refernce before attacking over the week-end?

TIA

Rob.

[HarryMann]

It's an easy one, nearside maybe a bit fiddlier than off. Does make a difference.

[RobH]

Is it a case of loosen off one at a time and rip out the old one, doesn't matter that they will be destroyed, and bolt up with the new one in?
Or do a side at a time, or remove all 4 and then replace and bolt back up?

[HarryMann]

Think logic decrees the first of those, I did one side at a time

[scottbott]

I pulled the steering rack out(because I could),pulled the bushes out and greased the new one and pushed them in with my fingers,piece of cake,refitted the rack,job done

[nutbox]

You can undo the 4 bolts and let the rack come down,if you keep a bolt in the bush you can tap it out with a hammer very easily and then slip the new ones in.
30 min job really

[Ian Hulley]

It made a massive difference on ours .... although they did fall to pieces once the rack was out of the way Allow a couple of hours including tooling up and a brew

Ian