In half hour I'm heading south coast, I just unlocked rear door put some things in and the lock won't work..
Any quick help please
I tried 2 keys, won't lock
I tried wd40 no use
I taken rear cover off and all looks good on the locking mechanism..
Arghhhhhhh. This is a mare
Urgent help please rear lock
Moderators: User administrators, Moderators
- elevensies
- Registered user
- Posts: 158
- Joined: 12 Nov 2012, 09:03
- 80-90 Mem No: 11808
- Location: Scunthorpe
Urgent help please rear lock
Last edited by elevensies on 28 Feb 2013, 18:21, edited 1 time in total.
http://www.landmfitness" onclick="window.open(this.href);return false;. Personal fitness, diet, training
- elevensies
- Registered user
- Posts: 158
- Joined: 12 Nov 2012, 09:03
- 80-90 Mem No: 11808
- Location: Scunthorpe
Re: Urgent help please rear lock
No worries, I will have to sort new barrel and what not when I get back now.
http://www.landmfitness" onclick="window.open(this.href);return false;. Personal fitness, diet, training
- CovKid
- Trader
- Posts: 8411
- Joined: 30 Apr 2006, 13:19
- 80-90 Mem No: 3529
- Location: Ralph - Coventry (Retired)
- Contact:
Re: Urgent help please rear lock
Unlikely to be barrel. If you remove panel inside again and get someone outside trying to open it, you'll see that the catch bit has slid along the little bar and is now missing the spot needed to open rear door.
Roller paint your camper at home: http://roller.epizy.com/55554/" onclick="window.open(this.href);return false; for MP4 download.
Re: Urgent help please rear lock
Unless they mean the key won't turn the barrel Covkid which means a stripdown.
Remove lock using allen key bolts and then remove the little pin that holds the end piece onto the barrel (the bit that pushes the lock mechanism). Place key inside barrel and remove. Look to see if all segments retract fully with key inserted. If not take key out of barrel taking care not to lose the segments and tiny little springs. Remove segments and springs (make not of the order as the segments (tumblers) are all different) and clean them all up. Carefully stretch the small springs slightly as they may have lost some of their springabilty over 25 years+. Refit springs and segments and try your key in the barrel and check all segments are pulled flush to the barrel.
See this for more of an idea http://www.hallvw.clara.net/lockpart.htm
Also check that the barrel hole in the lock body hasn't got grooves worn in it. Any deep scores and you may be better with a new lock. (use above as a guide to re-keying the new lock to you existing key)
Remove lock using allen key bolts and then remove the little pin that holds the end piece onto the barrel (the bit that pushes the lock mechanism). Place key inside barrel and remove. Look to see if all segments retract fully with key inserted. If not take key out of barrel taking care not to lose the segments and tiny little springs. Remove segments and springs (make not of the order as the segments (tumblers) are all different) and clean them all up. Carefully stretch the small springs slightly as they may have lost some of their springabilty over 25 years+. Refit springs and segments and try your key in the barrel and check all segments are pulled flush to the barrel.
See this for more of an idea http://www.hallvw.clara.net/lockpart.htm
Also check that the barrel hole in the lock body hasn't got grooves worn in it. Any deep scores and you may be better with a new lock. (use above as a guide to re-keying the new lock to you existing key)
- Ian Hulley
- Registered user
- Posts: 12661
- Joined: 11 Oct 2005, 08:08
- 80-90 Mem No: 1323
- Location: Wirksworth, Derbyshire ... or at t'mill
Re: Urgent help please rear lock
Our's is a bit stiff now and then ( ) Jerjiggle it a bit
Ian
Ian
The Hulley's Bus
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure
-
- Registered user
- Posts: 490
- Joined: 03 Oct 2012, 19:24
- 80-90 Mem No: 12639
- Location: South Bucks
Re: Urgent help please rear lock
1982 2 litre CU Auto Devon Moonraker called Brian