Problem with Propex

[markhale10]

It did have silicone, but it prised off carefully. I guess because it was old. The original warranty seal was still on so it had never been opened before. I did have to re-silicone to be safe.
Thanks for kind offer of hose, however I suspect it would cost more to post. I will check local hardware shop first. If no joy I will PM you and pay you via Paypal?
I guess I only need a few inches to clear the body?

[jason k]

No, there's a minimum distance it has to be away from the intake.

[ghost123uk]

No, there's a minimum distance it has to be away from the intake.

And that distance is ?

[PetenAli]

No, there's a minimum distance it has to be away from the intake.

And that distance is ?

Its 0.5 metre. You can download the instruction manual for fitting and use from the Propex web site. Just Google "Propex instructions" or similar.

[Oldiebut goodie]

Ideally the exhaust should go to the sills/outside body area so that the fumes have very little chance of entering the interior such as through tinworm holes and mouseholes, same as car exhaust etc..

[markhale10]

Found them here on the Autosleeper website... http://www.autosleeper.vwt25camper.info ... ionsWM.pdf" onclick="window.open(this.href);return false;

Fitting instructions very clear on fitting of exhaust hose. Thanks again folks.