Do Golf parts fit

[monkeyboysee]

hi all,

i'm sure i read an earlier post that golf mk1 window scrapers are the same as T25? am i right, i'm off to a scrpayard soon for bits for my car, thought i might have alook for the scrapers if i get chance, price them up etc.

cheers

[jimpainter]

I think i remember reading that somewhere. The blower fan is the same as well i think.

[gtavalanche]

Good luck finding a mk1 golf in a scrappy!

[monkeyboysee]

really/

bugger, i thought i might have a chance.

[monkeyboysee]

if i can find one, what bits are worth getting, what will fit T25's?

[1664]

Grab yerself a few relays

[ZsZ]

link: (it's german, but you can use some webpage translator)
http://www.t3-infos.de/t3-infos_j.html

[monkeyboysee]

that list is top drawer, i opened it in Google Chrome, it translated it for me!

theres nothing on the list that's on my radar, but it really good, you should enquire about it going into the Wiki?

[ZsZ]

Sometimes when I am after some part, just search in ETKA for all models (ATP search if you have ETKA)
But not easy to get ETKA (or ETOS)
or you can search here online: http://www.vagcat.com/epc/ (unfortunately the search is unavailable this time for some reason)

[Cruz]

Scrapers are about £17. Hardly worth sourcing 2nd hand cracked ones off a golf that don't fit

[monkeyboysee]

the trouble is i need 2 x scrapers and 2 x hockey sticks (for the top), it starts to get v expensive, its money i haven't got, budgets are v.v.vtight. I'm assuming that i can get 4 pieces from a scrpper much cheaper, the question is will they fit?

[lloydy]

The section that goes up and over the door frame is mk1 golf/T25. I got mine fom heritage, they list them to fit both. I had to cut a small part off.
The j shaped part I don't know, but you can swap them all around so the inner ones become outer ones on the opposite door

[monkeyboysee]

i already thought of that, all 4 x external pieces are really shot, there is very little rubber left, the metal is rusty and / or non existent! It looks shocking and really shabby.

[Cruz]

A T3 is the wrong vehicle for cheap motoring...........sadly

But here goes if anyone wants new as I am pretty sure golf J scrapers do not fit, and finding a T3 on a scrapyard is like finding the holy grail

Window Scrapers £18 OS in/NS out
http://www.brickwerks.co.uk/shop?page=s ... ory_id=204" onclick="window.open(this.href);return false;

Window Scrapers £18 OS out/NS in
http://www.brickwerks.co.uk/shop?page=s ... ory_id=204" onclick="window.open(this.href);return false;

*********Seal that fits top of window and down the side £19.82
http://www.brickwerks.co.uk/shop?page=s ... ory_id=204" onclick="window.open(this.href);return false;

********** This is half the price of anywhere else

Otherwise ebay could be a source of 2nd hand (but ebay isn't cheap these days)

[monkeyboysee]

called into a decent scrapyard today. I ft they had a mk1 golf in, a a scraper and hockey stick would be £10 for the pair, which would be a total of £20.00 to me. compare that against £75.64 for the ones Cruz kindly listed form Brickwerks.

thats £55.00 that i could spend on something else, for something thats just tidying the van.