Cheers all. As I said above the washers stopped working both times the jets were replaced. The wiring was not touched on either occasion. Now after two weeks they started working again today. Still got a virtually silent pump. I am now convinced that this problem relates to a dodgy non return valve which has jammed after the fluid drained out of the pipes. That's my theory. Anyway saved wasting money on a new pump.
washer jets problem - OVER
Moderators: User administrators, Moderators
-
Ralf85
- Registered user
- Posts: 4447
- Joined: 13 Jan 2010, 12:42
- 80-90 Mem No: 4418
- Location: West London - 1985 westie pop top, LHD, 1900 DF engine
washer jets problem - OVER
Last year my washer jets were working but were replaced as part of my resto. When I got my van back the the new washers did not work. About two weeks later they started working again and have done ever since. I just had some insurance work done on the van and you guessed it, the working washer jets were replaced again. The new ones don't work. If the problem is not the pump itself could it be a jammed water non return valve? Has anybody had a similar problem?

Cheers all. As I said above the washers stopped working both times the jets were replaced. The wiring was not touched on either occasion. Now after two weeks they started working again today. Still got a virtually silent pump. I am now convinced that this problem relates to a dodgy non return valve which has jammed after the fluid drained out of the pipes. That's my theory. Anyway saved wasting money on a new pump.
Cheers all. As I said above the washers stopped working both times the jets were replaced. The wiring was not touched on either occasion. Now after two weeks they started working again today. Still got a virtually silent pump. I am now convinced that this problem relates to a dodgy non return valve which has jammed after the fluid drained out of the pipes. That's my theory. Anyway saved wasting money on a new pump.
Last edited by Ralf85 on 16 Nov 2012, 14:05, edited 1 time in total.
- 1664
- Registered user
- Posts: 8746
- Joined: 30 Mar 2006, 15:20
- 80-90 Mem No: 3299
- Location: Coventry Member
Re: washer jets problem
Are you saying the pump is running? Mine is just pipes off the pump; I don't think there is a non return valve unless it is integral to the pump. If the pump's running and no water's appearing at the jets due to the pipes falling off I'd have thought your floor would be swimming in it by now (or perhaps UNDER the mats).Ralf85 wrote:If the problem is not the pump itself could it be a jammed water non return valve?
Vorsprung Durch Technik my ar$e!
-
Ralf85
- Registered user
- Posts: 4447
- Joined: 13 Jan 2010, 12:42
- 80-90 Mem No: 4418
- Location: West London - 1985 westie pop top, LHD, 1900 DF engine
Re: washer jets problem
Cheers Brendan
I was just checking to see if anybody else has experienced a similar problem. It does seem odd that the washers should stop co-incidentally following replacement when they were working fince before. I know that these vans are quirky and wondered if anybody else had this happen to them, before I getunder!!! to check out the pump
I was just checking to see if anybody else has experienced a similar problem. It does seem odd that the washers should stop co-incidentally following replacement when they were working fince before. I know that these vans are quirky and wondered if anybody else had this happen to them, before I getunder!!! to check out the pump
-
Plasticman
- Trader
- Posts: 8081
- Joined: 12 Oct 2005, 20:55
- 80-90 Mem No: 1948
- Location: lincolnshire
Re: washer jets problem
I hope they didnt forget to connect the pipes back on then shooved the jets in
mm
mm
-
Ralf85
- Registered user
- Posts: 4447
- Joined: 13 Jan 2010, 12:42
- 80-90 Mem No: 4418
- Location: West London - 1985 westie pop top, LHD, 1900 DF engine
Re: washer jets problem
metalmick8y wrote:I hope they didnt forget to connect the pipes back on then shooved the jets in![]()
mm
They assured me that the pipes were connected up. Brendan I have never heard the pump it has always been incredibly silent which has always surprised me. I will check it out again and find out the problem. Cheers guys.
- 1664
- Registered user
- Posts: 8746
- Joined: 30 Mar 2006, 15:20
- 80-90 Mem No: 3299
- Location: Coventry Member
Re: washer jets problem
Ralf85 wrote:Brendan I have never heard the pump it has always been incredibly silent
just out of interest, can you hear the rear washer pump? They are identical parts I think.....
Vorsprung Durch Technik my ar$e!
- ghost123uk
- Registered user
- Posts: 6855
- Joined: 10 Mar 2006, 10:15
- 80-90 Mem No: 2585
- Location: John in Malpas, in the very S. W. part of Cheshire.
- Contact:
Re: washer jets problem
1664 wrote: just out of interest, can you hear the rear washer pump? They are identical parts I think.....
Posh git
Got a new van, but it's a 165bhp T4 [shock horror] Accurate LPG Station map here
-
Ralf85
- Registered user
- Posts: 4447
- Joined: 13 Jan 2010, 12:42
- 80-90 Mem No: 4418
- Location: West London - 1985 westie pop top, LHD, 1900 DF engine
Re: washer jets problem
ghost123uk wrote:1664 wrote: just out of interest, can you hear the rear washer pump? They are identical parts I think.....
Posh git
Beat me to it.
- 1664
- Registered user
- Posts: 8746
- Joined: 30 Mar 2006, 15:20
- 80-90 Mem No: 3299
- Location: Coventry Member
Re: washer jets problem
I take it that's a 'no' then........
are you sure you have a front one?
are you sure you have a front one?
Vorsprung Durch Technik my ar$e!
-
Ralf85
- Registered user
- Posts: 4447
- Joined: 13 Jan 2010, 12:42
- 80-90 Mem No: 4418
- Location: West London - 1985 westie pop top, LHD, 1900 DF engine
Re: washer jets problem
1664 wrote:I take it that's a 'no' then........
are you sure you have a front one?
Yup, I have seen the pump several times, but I don't have luxuries like heated rear screen and wash/wipe.
- 1664
- Registered user
- Posts: 8746
- Joined: 30 Mar 2006, 15:20
- 80-90 Mem No: 3299
- Location: Coventry Member
Re: washer jets problem
if it's any comfort I rarely use them
anyway, back to your front one; like I said, mine makes a right racket - so I'd put money on yours being 'broken' as opposed to 'silent'
try tw@tting it a few times with a screwdriver handle or similar. Found mine not working on the morning of the MoT so I removed it and gave it a severe talking to......
anyway, back to your front one; like I said, mine makes a right racket - so I'd put money on yours being 'broken' as opposed to 'silent'
try tw@tting it a few times with a screwdriver handle or similar. Found mine not working on the morning of the MoT so I removed it and gave it a severe talking to......
Vorsprung Durch Technik my ar$e!
- AdrianC
- Registered user
- Posts: 2975
- Joined: 29 Dec 2010, 21:57
- 80-90 Mem No: 9144
- Location: Living in Hay whilst the Sun pours down.
- Contact:
Re: washer jets problem
1664 wrote:anyway, back to your front one; like I said, mine makes a right racket - so I'd put money on yours being 'broken' as opposed to 'silent'![]()
Ralf - yours is LHD, right? So the washer pump's just underneath your feet. Stand by the open door, ignition on but engine not running. Kneel down as far as you can whilst still reaching the wiper switch. Then wash. You'll hear it if it's running.
A year and a half living in a Westy hightop... http://www.WhereverTheRoadGoes.com" onclick="window.open(this.href);return false;
- 1664
- Registered user
- Posts: 8746
- Joined: 30 Mar 2006, 15:20
- 80-90 Mem No: 3299
- Location: Coventry Member
Re: washer jets problem - OVER
Well don't just leave us in suspenders - what was it??
it's something embarrassing isn't it
it's something embarrassing isn't it
Vorsprung Durch Technik my ar$e!
-
Ralf85
- Registered user
- Posts: 4447
- Joined: 13 Jan 2010, 12:42
- 80-90 Mem No: 4418
- Location: West London - 1985 westie pop top, LHD, 1900 DF engine
Re: washer jets problem - OVER
Cheers all. As I said above the washers stopped working both times the jets were replaced. The wiring was not touched on either occasion. Now after two weeks they started working again today. Still got a virtually silent pump. I am now convinced that this problem relates to a dodgy non return valve within the pump which has jammed after the fluid drained out of the pipes. That's my theory. Anyway saved wasting money on a new pump. Yet another quirky T25 problem solved.
