Early sliding door handle dimensions please?

Thin bits of metal and bright blue light.

Moderators: User administrators, Moderators

Locked
williamraff
Registered user
Posts: 107
Joined: 16 Sep 2012, 15:53
80-90 Mem No: 11501
Location: Leeds

Early sliding door handle dimensions please?

Post by williamraff »

Hi folks, my recent acquisition arrived minus a sliding door handle. My van is 1983 model, can anyone please tell me how long the sliding door handle is for this year of van, I understand there are two -one up to 1985 and another for later vans?
Thanks,Will.
Remember EBAY and alcohol do not mix!

mig
Registered user
Posts: 220
Joined: 09 Nov 2006, 19:57
80-90 Mem No: 4193

Re: Early sliding door handle dimensions please?

Post by mig »

My sliding door handle (1982) is 8 inches long,or as Nigel Farage would say 20cm,not sure how much shorter the later handle is.
I ended up buying two for mine,as on the first one I just could not remove the grub screw holding the lock barrel in,so if you want to swap over locks or have it re-set to take your existing key, it may be worth asking the seller to check the lock barrel will come out.They can be tricky to find ,expensive or both.
Good Luck

williamraff
Registered user
Posts: 107
Joined: 16 Sep 2012, 15:53
80-90 Mem No: 11501
Location: Leeds

Re: Early sliding door handle dimensions please?

Post by williamraff »

mig wrote:My sliding door handle (1982) is 8 inches long,or as Nigel Farage would say 20cm,not sure how much shorter the later handle is.
I ended up buying two for mine,as on the first one I just could not remove the grub screw holding the lock barrel in,so if you want to swap over locks or have it re-set to take your existing key, it may be worth asking the seller to check the lock barrel will come out.They can be tricky to find ,expensive or both.
Good Luck


Thanks, that sounds like good advice.

Will :ok .
Remember EBAY and alcohol do not mix!

Locked