Advice needed to remove roof bed in Hi-Top. (The sliding bit

[Charlie1950]

Having made new curtains for our 1989 T25 Auto-Sleeper Trident, my very clever wife is undertaking replacing all the foam seats/beds and re-upholstering them. Our one problem is the removal of the sliding part of the roof bed . Try as we might it has us totally stumped as the Hi-Top roof slopes inwards . My question is, can it actually be removed, (without removing the roof that is!!!), and if it can be removed we would appreciate any advice as to how .

Thanks for any advice that may be forthcoming.

Charlie

[Plasticman]

well i get them out/orf or whatever passes for ingleesh on this forum see somewhere buried in here https://club8090.co.uk/forum/viewtopic.php?f=38&t=93497" onclick="window.open(this.href);return false;
mm

[mm289]

If you open the sliding window in the hitop you can twist the bed section so a corner goes out the window and that gives you enough room to turn it. then it just comes forward and drops out

MM

[Charlie1950]

Thanks for the advice mm, it worked a treat.

Charlie.

[mm289]