NEEDED PICTURE OF REAR BRAKES

[phil miller]

as title i need some clear pics of the rear brake shoes and spring set up please

[CycloneMike]

This any use?
https://club8090.co.uk/forum/garage.php? ... ge_id=1550" onclick="window.open(this.href);return false;

[phil miller]

This any use?
https://club8090.co.uk/forum/garage.php? ... ge_id=1550" onclick="window.open(this.href);return false;

That my friend is spot on my only problem now is i dont think i have the bit the 2 springs connect to under the cylinder and one of my adjusters on the bottom is broken so ive gotta find a new one

Thank you for your help mate

[ninja.turtle007]

Thus is a pic from my rear brake rebuild


All parts are from Brickwerks.

[Oldiebut goodie]

That my friend is spot on my only problem now is i dont think i have the bit the 2 springs connect to under the cylinder

So did mine - I just made a new one and welded it on.

[billy739]

i think that will mean you have bay window ( type 2) rear back plates.

they dont have this bit and you will have adjusters at the bottom where the pic shows the blanks.
the t25 did away with the manual adjusters , thats the auto adjuster under the cylinder.

[bigherb]

Thus is a pic from my rear brake rebuild


All parts are from Brickwerks.

The bottom spring is supposed to be behind the shoes and the wiggly hooked end on the handbrake lever shoe.

[Hacksawbob]

The bottom spring is supposed to be behind the shoes and the wiggly hooked end on the handbrake lever shoe.

Hi Mr Herb, just adding that image to the wiki, what difference does it make with the squiggly bit on the wrong shoe?

[bigherb]

Use this one then

[phil miller]

i think that will mean you have bay window ( type 2) rear back plates.

they dont have this bit and you will have adjusters at the bottom where the pic shows the blanks.
the t25 did away with the manual adjusters , thats the auto adjuster under the cylinder.

would that be a problem? looks like both my back plates arent that old, do i just put new shoes on the same as the old ones or do i use the t25 spring kit and fit the blank bottom adjusters?