I've just fitted a 1Z for a customer of Aidans, using a VW TDI flywheel, LUK TDI pressure plate and LUK WBX friction plate. I'm finding it has slight clutch drag. I adjusted the clevis/pushrod, and bled the clutch, and checked its giving full movement at the slave (15mm). It's pointing toward an issue with the clutch.
Has anyone come across such a problem ?
Clutch drag w. TDI flywheel/clutch ?
Moderators: User administrators, Moderators
-
syncroandy
- Trader
- Posts: 1912
- Joined: 18 Oct 2005, 18:15
- 80-90 Mem No: 851
- Location: North Lancs. UK
- Contact:
Clutch drag w. TDI flywheel/clutch ?
Syncrosport (taking a break as of summer 2024)
Volkswagen Transporter, reloaded.
252 GC5 EJ25 AAN L90D
Volkswagen Transporter, reloaded.
252 GC5 EJ25 AAN L90D
-
toomanytoys
- Trader
- Posts: 2870
- Joined: 11 Oct 2005, 18:37
- 80-90 Mem No: 41
- Location: Boston area, South Lincolnshire
Re: Clutch drag w. TDI flywheel/clutch ?
I know its prob a silly question..
Input shaft not a bit tight on the spigot bearing??
Input shaft not a bit tight on the spigot bearing??
-
syncroandy
- Trader
- Posts: 1912
- Joined: 18 Oct 2005, 18:15
- 80-90 Mem No: 851
- Location: North Lancs. UK
- Contact:
Re: Clutch drag w. TDI flywheel/clutch ?
Can't rule that out I suppose but need to get 'box off to find the cause. Will be doing that in a few weeks when refurb box is ready, taking a break from the job now. Engine seems good, so just the trans side of things to sort. Plus TDI PAS->T3 TD plumbing.
Syncrosport (taking a break as of summer 2024)
Volkswagen Transporter, reloaded.
252 GC5 EJ25 AAN L90D
Volkswagen Transporter, reloaded.
252 GC5 EJ25 AAN L90D