Centre bottom of dash

[James.rigby]

Hi all how does the heater vents next to the glove box attatch to the bulkhead/dash?? Cheers jim

[Plasticman]

push fit , there are iirc 2 small lugs on the top and 2 on the bottom , ducting at rear is pushed on over simmilar 'protrusions'
mm

[James.rigby]

Don't think I have any mate are they part of the dash or centre ducting. Could you get a pic for me? Cheers

[Plasticman]

Ah you mean the triangularish shaped bit that is behind the gear stick and under the dash, if so then hand eitherside , fingers at the back , thumbs on the front face and press in with thumbs and sort of curve it and it will pop off..fwd
mm

[James.rigby]

But what does it press into mike? Lol

[Bilson]

But what does it press into mike? Lol

Are you wanting to keep it in place rather than remove it? if so, I've got the same problem!

[Plasticman]

lugs as such on the heater unit
mm

[James.rigby]

What if I have no heater unit lol

[kevtherev]

What colour is it?

[James.rigby]

Black kev it has the vents on the side of the unit. Want a pic?

[Dazco]

lugs as such on the heater unit
mm

as MM says, but they do have a tendancy to break off, i had to hot melt a couple back in place on mine that were just about to snap off

[James.rigby]

I've past that daz they gone. Never to be seen again lol