Drivers swivel seats

[Crackers211]

Hi. My 85 Autosleeper has a swivel seat on the passenger side, but I was wondering if anyone has fitted one to the drivers side?? Ive had a look and the handbrake looks like it would get in the way, is their any way round this??
Cheers
Dave Crackers

[Ian Hulley]

We have a bolt-in swivel on both front seats, the driver's is a tad fiddly and involves the seat going right back, armrest down and quite low and the handbrake being off/only just on (until it was adjusted low before the mot). I can't comment on the Autosleeper interior but our homebrew leaves enough room to swivel to the '7 o'clock' position making all the front of the cab usable.

Ian

[trucker]

Standard on westys, Mine is being removed though as I need the 3cms of head room they take up, also as Ian said a bit of a faf.

[1664]

I think most conversions fitted them to both sides otherwise the seats are at different heights and look 'odd'. The handbrake can be a P.I.T.A but I just let it off and keep my foot on the brake till it's swivelled past and then reapply the handbrake.

[pi quattro]

I have an 86 autosleeper and both front seats swivel. The drivers seat can't go full 180 degrees as the units are in the way but with a bit of jigging about opening doors, tilting and sliding, it turns 90 degrees. This way someone can sit at the small table that fits between the seats.

There's a pic in here -

http://autosleeper.vwt25camper.info/198 ... hureWM.pdf" onclick="window.open(this.href);return false;