Carat alloy wheel question

All things round and their alignment to your direction of travel

Moderators: User administrators, Moderators

Post Reply
User avatar
New Kentish Campers
Registered user
Posts: 1739
Joined: 12 Oct 2010, 06:16
80-90 Mem No: 8994
Location: Near Linton, Kent.
Contact:

Carat alloy wheel question

Post by New Kentish Campers »

I am thinking of buying a set of Carat alloys to fit onto my van.

I know that they are 14" rim size, but, would the tyres from my stock steel wheels fit safely? It's just that the tyres on the van are of a good make, almost new [5 of them] and are proper commercial rated ones. If I could simply just swap the tyres over, then I could keep the stock steel spare wheel too, just in case I can't find five alloys.

And, am I right in thinking that I'd need the correct wheel bolts too please?

Any ideas welcome :)

Thanks,
Doug.
Last edited by New Kentish Campers on 21 Feb 2012, 17:58, edited 1 time in total.

User avatar
Titus A Duxass
Registered user
Posts: 5777
Joined: 24 Nov 2007, 08:22
80-90 Mem No: 4475
Location: Cologne

Re: Carat alloy wheel question

Post by Titus A Duxass »

Don't know about the tyres but you do need the correct bolts and nuts (taper I think).
VW T3 GTi Camper 2,0l

User avatar
andisnewsyncro
Registered user
Posts: 1074
Joined: 27 Jan 2007, 17:43
80-90 Mem No: 3311
Location: Retford. North Nottinghamshire

Re: Carat alloy wheel question

Post by andisnewsyncro »

Standard 185R15 is fine on Carat alloys. Tapered nuts & bolts it is
What a long strange trip it's been

User avatar
New Kentish Campers
Registered user
Posts: 1739
Joined: 12 Oct 2010, 06:16
80-90 Mem No: 8994
Location: Near Linton, Kent.
Contact:

Re: Carat alloy wheel question

Post by New Kentish Campers »

Oh that's great Andy, thank you. :)

Now I can bung an advert in for a set, and seeing as the tyres will be ok, only need 4 rims instead of 5 :ok

User avatar
andisnewsyncro
Registered user
Posts: 1074
Joined: 27 Jan 2007, 17:43
80-90 Mem No: 3311
Location: Retford. North Nottinghamshire

Re: Carat alloy wheel question

Post by andisnewsyncro »

Don't forget to keep a set of radiused bolts/nuts for the spare then :wink:
What a long strange trip it's been

California Dreamin
Registered user
Posts: 2673
Joined: 03 Apr 2007, 12:54
80-90 Mem No: 8386
Location: Nottingham

Re: Carat alloy wheel question

Post by California Dreamin »

andisnewsyncro wrote:Standard 185R15 is fine on Carat alloys. Tapered nuts & bolts it is


I'm sure that was just a slip....14 inch rims require 14 inch tyres.

Plus
Good call about the spare but remember it's radialized nuts and bolts, 5 of each so I'd be looking for a 5th Carat wheel in the long term.

Martin
1989 California 2.1MV

User avatar
andisnewsyncro
Registered user
Posts: 1074
Joined: 27 Jan 2007, 17:43
80-90 Mem No: 3311
Location: Retford. North Nottinghamshire

Re: Carat alloy wheel question

Post by andisnewsyncro »

California Dreamin wrote:
andisnewsyncro wrote:Standard 185R15 is fine on Carat alloys. Tapered nuts & bolts it is


I'm sure that was just a slip....14 inch rims require 14 inch tyres.

Plus
Good call about the spare but remember it's radialized nuts and bolts, 5 of each so I'd be looking for a 5th Carat wheel in the long term.

Martin


:oops: Well spotted Martin, yes a bit of a bad typo there from me :oops:
- DO NOT try and put 185R15s on Carat alloys :D
What a long strange trip it's been

Post Reply