bottom pulley
Moderators: User administrators, Moderators
bottom pulley
Just changing the cambelt on a 1.6td t25 problem is i can't get the bottom pulley 19mm bolt off tried a breaker bar with a scaff tube and everthing, i'm guessein the only way to get it off is removing the exhaust and cutting a hole in the back panel then using a pneumatic wrench with an extension bar to 'shock' it off, but surely there must be a simpler way please someone help me before i resort to removing the exhaust and probably shearing the bolts off in the turbo in the process then taking the angle grinder to the back panel!
-
camper
- Registered user
- Posts: 357
- Joined: 30 Oct 2005, 20:26
- 80-90 Mem No: 1710
- Location: Bookham Surrey
Re: bottom pulley
You dont need to undo the 19mm bolt for the bottom crankshaft cog to replace the cam belt.Only undo the the v belt bottom pulley bolts then remove it & the the cam belt cover to fit the belt over the bottom cog.