AAZ cooling system preasure

[downhillhotrod]

Hi guys, I hope someone can help me out here...

So a few weeks back, I was making sure the fluids were ok in my T25 with AAZ engine. Like a tit, I forgot to put the cap back on the expansion tank and went for a spin. Needless to say, its gone AWOL!

So I need a new one but I cant find wht PSI it should vent at. Its an old style cap (similar to mini's etc) and cant find any info about it so im assuming its a mod done when the conversion was done (not by me).

Can anyone help?

[kevtherev]

Brickwerks has a cap that fits

[ringo]

http://www.brickwerks.co.uk/shop?page=s ... ory_id=110

There you go

Ringo

[downhillhotrod]

Thanks guys but that wont do it. The cap is an old fashioned type (push down, turn 1/2 turn).
I can find them all over ebay but I need to know what PSI im going for.

[kevtherev]

If you meant the metal type why didn't you say
http://www.brickwerks.co.uk/shop?page=s ... ory_id=118" onclick="window.open(this.href);return false;

part numbers not pressure define the correct cap

[downhillhotrod]

If you meant the metal type why didn't you say
http://www.brickwerks.co.uk/shop?page=s ... ory_id=118" onclick="window.open(this.href);return false;

part numbers not pressure define the correct cap

Because like I said above, I wasnt sure it was a standard part hence me enquiring about the blow off preasure so I could get one.

Thanks for the link, i'll get one ordered.