Carb gasket for 1.9 WBX/ Pierburg

Post by **AdeyB** » 16 Dec 2011, 09:08

Mornin'
About to replace the carb on the "Snail", is there and if there is, what is the part number, for any gasket required between base of carb and inlet mani.
Or does it seal on a reusable rubber mounting thingy?
Cheerski verski muchski
Adey

Post by **Novice in need** » 16 Dec 2011, 09:32

Hi contact Gower & Lee,
I had a right job getting the gasket, however a fellow member helped me out.
Sorry i cant off the top of my head remember the part number.

Post by **AdeyB** » 16 Dec 2011, 10:11

Thanks!
Will investigate
Adey

Post by **Aidan** » 16 Dec 2011, 10:18

got a new one for 2wd in stock back at the unit Monday call me then if interested

Post by **AdeyB** » 16 Dec 2011, 21:35

Cheers Aidan. If Bromyard ain't got one I'll give you a buzz.
Ade

Post by **Novice in need** » 16 Dec 2011, 23:08

Aiden sorted me out with the gaskets, if i was you i'd grab him by the balls (not literally) and take him up on his offer. He really saved me alot of hassle.
Good luck hope you get your bus running.

Post by **AdeyB** » 17 Dec 2011, 00:04

The carb is coming from Bromyard's: he reckon's he's got one.
Either way, I'll phone Aiden monday!!!!
Cheers!
Ade

Post by **AdeyB** » 19 Dec 2011, 10:51

Cheers Aidan!

Club 80-90 Forums

Carb gasket for 1.9 WBX/ Pierburg

Carb gasket for 1.9 WBX/ Pierburg

Re: Carb gasket for 1.9 WBX/ Pierburg

Re: Carb gasket for 1.9 WBX/ Pierburg

Re: Carb gasket for 1.9 WBX/ Pierburg

Re: Carb gasket for 1.9 WBX/ Pierburg

Re: Carb gasket for 1.9 WBX/ Pierburg

Re: Carb gasket for 1.9 WBX/ Pierburg

Re: Carb gasket for 1.9 WBX/ Pierburg