t25 outrigger/jacking point

[Plasticman]

Well there you have it 'duncanw' the right part for the the job done the right way.
mm

[Cruz]

As I alluded to earlier that is not an outrigger according to the VW catalogue, it is the cross member

Cross Member (12 and 13)



Outrigger



Glad you are getting it sorted

But just in case anyone needs to know

251 803 233 Cross member left £15.29 + vat
251 803 234 Cross member right £4.58 + vat

251 803 125 A Outrigger upper left £41.41+vat
251 803 126 A Outrigger upper right £41.41+vat

251 803 153 A Outrigger lower left £22.79+vat
251 803 154 A Outrigger lower right £22.79+vat

[Plasticman]

We do luv you mr cruz
mike

[Cruz]

I'd swap it all for the ability to stitch a van back together

[jimpainter]

251 803 234 Cross member right £4.58 + vat

Wow thats cheap.

[Cruz]

Usually parts that become that cheap are on back order and may become obsolete, or are very near to becomming obsolete.

[duncanw]

Thanks loads CRUZ that's great
Not and issue with the floor as that's quite corroded and I was going to get replaced anyway
Two more (probably stupid questions)
The jacking point is guess is 10 or 11 (and what is their part nos)
And when talk left/right of the van is that as you look at it from the front and does it matter if lhd or rhd I have rhd and the offside front is the corroded one
Cheers again
Duncan

[Plasticman]

If I can nip in here, 10 + 11 are what they look like but the pertinent part that fits up inside the B post is not available, if I could find one of my posts I would link you to what you may need
mm

[Cruz]

Firstly left and right are as if you were sat in the drivers seat. Right is offside, left is nearside (RHD)

10 and 11 are NLA from VW but brickwerks sell them from classic in germany

They are just location pieces to stop the stadard jack from moving and are in no way structural

http://www.brickwerks.co.uk/shop?page=s ... t3+jacking" onclick="window.open(this.href);return false;

Left one does not show so must be out of stock. Send them an email.