All things round and their alignment to your direction of travel
Moderators: User administrators , Moderators
thespragster
Registered user
Posts: 18 Joined: 18 Sep 2011, 17:15
80-90 Mem No: 10271
Location: Norfolk
Contact:
Quote
0
login to like this post
Post
by thespragster » 14 Nov 2011, 22:01
Hi all,
Just got some new steel rims for my bus and wondered if anybody knows where's best to get some centre caps for the middle of the wheel.
Uploaded with
ImageShack.us
^^(hope that worked)^^
Any advice gratefully received!!
Ta Paul.
jim potter
Registered user
Posts: 160 Joined: 06 May 2011, 14:10
80-90 Mem No: 10094
Location: colchester, essex
Quote
0
login to like this post
Post
by jim potter » 14 Nov 2011, 22:36
could do worse than try ebay .. just measure the opening and see what comes up, failing that they look like a minilite style of wheel or are they an empi unit ? any markings on the back ?
Gti caravelle gl.
Cruz
Registered user
Posts: 3919 Joined: 12 Oct 2005, 10:40
80-90 Mem No: 2092
Quote
0
login to like this post
Post
by Cruz » 15 Nov 2011, 09:02
The bolt holes look wierd. They seem to have no radius or taper seat
thespragster
Registered user
Posts: 18 Joined: 18 Sep 2011, 17:15
80-90 Mem No: 10271
Location: Norfolk
Contact:
Quote
0
login to like this post
Post
by thespragster » 15 Nov 2011, 18:10
Well they are now on and seem to be OK
gaz f
Registered user
Posts: 515 Joined: 27 Apr 2009, 13:06
80-90 Mem No: 6697
Quote
0
login to like this post
Post
by gaz f » 16 Nov 2011, 15:35
What are they off of? Or where did you get them from? They do suit it rather well.
thespragster
Registered user
Posts: 18 Joined: 18 Sep 2011, 17:15
80-90 Mem No: 10271
Location: Norfolk
Contact:
Quote
0
login to like this post
Post
by thespragster » 16 Nov 2011, 17:10
Hi,
I got them off eBay and the chap had them on his Autohomes Karisma......that is all I know of their origin!
gaz f
Registered user
Posts: 515 Joined: 27 Apr 2009, 13:06
80-90 Mem No: 6697
Quote
0
login to like this post
Post
by gaz f » 16 Nov 2011, 17:52
No manufacturers details on the back of them or anything? They really do look good on the van!
R0B
Moderator
Posts: 19388 Joined: 07 Oct 2005, 17:33
80-90 Mem No: 864
Location: Cheshire
Quote
0
login to like this post
Post
by R0B » 16 Nov 2011, 17:57
As they have no seats for the bolts.I would be very wary about using them myself.
What bolts have you used?
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
thespragster
Registered user
Posts: 18 Joined: 18 Sep 2011, 17:15
80-90 Mem No: 10271
Location: Norfolk
Contact:
Quote
0
login to like this post
Post
by thespragster » 16 Nov 2011, 18:10
Hi,
The only markings they had was DRAG on the inside of the rim, there is a wheel company called "drag" but these are not on their website (tho I would imagine they are quite old)
I had the tyres & wheels fitted at a local Treadfirst and they did'nt say anything about the bolts (I used the ones that were on the van as these bolted straight on with no messsing!)
Ta Paul.
R0B
Moderator
Posts: 19388 Joined: 07 Oct 2005, 17:33
80-90 Mem No: 864
Location: Cheshire
Quote
0
login to like this post
Post
by R0B » 16 Nov 2011, 19:55
Im not sure you should be putting radiused nuts on non radiused wheels
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
ghost123uk
Registered user
Posts: 6855 Joined: 10 Mar 2006, 10:15
80-90 Mem No: 2585
Location: John in Malpas, in the very S. W. part of Cheshire.
Contact:
Quote
0
login to like this post
Post
by ghost123uk » 17 Nov 2011, 10:23
R0B wrote: Im not sure you should be putting radiused nuts on non radiused wheels
Agreed - I would be keeping a very close eye on your bolts tightness and checking them often !
Cruz
Registered user
Posts: 3919 Joined: 12 Oct 2005, 10:40
80-90 Mem No: 2092
Quote
0
login to like this post
Post
by Cruz » 17 Nov 2011, 11:51
Ebay those wheels, put your originals back on (descibe them fully down to the bolt holes) and live a long and happy life
kevtherev
Registered user
Posts: 18832 Joined: 23 Oct 2005, 20:13
80-90 Mem No: 2264
Location: Country estate Wolverhampton Actually
Quote
0
login to like this post
Post
by kevtherev » 18 Nov 2011, 20:44
do you know any offset measurements and load ratings for them?
AGG 2.0L 8V. (Golf GTi MkIII)
hugomonkey
Registered user
Posts: 1033 Joined: 26 Apr 2011, 05:29
80-90 Mem No: 10485
Location: Denmark
Quote
0
login to like this post
Post
by hugomonkey » 19 Nov 2011, 11:01
you need to get those bolts seated properly or you will be driving down the motorway and your own wheels will overtake you! SERIOUSLY!!!