CU Engine mount replacement

[Realize]

HI Guys

Just ordered some bits from Brickwerks.

Some of which are new engine mounts, can any one give me a procedure list and let me know of any pitfalls to watch out for when fitting them.

inner or outer first?

Cheers Jay

[82JEW75]

Remove engine.

Remove exhaust if it's in the way.

Remove engine support bar.

Remove and replace mounts.

Replace support bar.

Replace exhaust if you removed it.

Refit engine.

[weird fish]

hi there i did mine a while back you dont have to drop the engine...

[adybrooks]

Hi , i need to replace my mounts. how can u do it without dropping the engine? if you could give me details that would be great.
thanks

[shepster]

Hi , i need to replace my mounts. how can u do it without dropping the engine? if you could give me details that would be great.
thanks

Undo the mounts and jack up the engine enough to get new ones in, I cant remember if silencer HAS to come off as i was changing mine at the time so was off anyway.

[adybrooks]

Will the heat exchangers need to come off ? the engine will only go up about 30mm before they hit the support bar.

[faggie]

when i normally do them i just lower the engine down still connected to gearbox first remembering to remove gearshift from gearbox so you dont bend the rod , then remove the cooling fan with thermostat still conected and rest the coolin fan on top of engine then remove alloy fan shroud and then its easy to replace the mounts