what has everyone one else done
Cheers
table floor base
Moderators: User administrators, Moderators
table floor base
Hi all, does anyone know the height of a table base for the floor. Rather than having to drill a hole in the cargo floor, the other option is to fit a surface one
what has everyone one else done
Cheers
what has everyone one else done
Cheers
Re: table floor base
kevtherev wrote:Cut a hole...
How deep does the hole have to be Kev? I assume you only have to cut into the baseboard and not the bodywork?
Thinking of fitting one myself.
Cheers.
Martin.
Diesel is an engine not a fuel.
I liked camping so much I went full time.
Diesel is an engine not a fuel.
I liked camping so much I went full time.
Re: table floor base
the hole has to be 50mm depth... so either you raise your floor with wood batterns then hardboard to allows for depth , or you cut hole in cargo floor.
-
kevtherev
- Registered user
- Posts: 18832
- Joined: 23 Oct 2005, 20:13
- 80-90 Mem No: 2264
- Location: Country estate Wolverhampton Actually
Re: table floor base
Standard hole saw does it easily.
Once fitted a liberal spraying of chain grease seals it up
Once fitted a liberal spraying of chain grease seals it up
AGG 2.0L 8V. (Golf GTi MkIII)
-
1664
- Registered user
- Posts: 8746
- Joined: 30 Mar 2006, 15:20
- 80-90 Mem No: 3299
- Location: Coventry Member
Re: table floor base
You can do a surface job by using the same fitting the pole goes into as the table itself. Downside is it looks cr@p and pokes up so you'll be constantly tripping over it....................
Vorsprung Durch Technik my ar$e!
Re: table floor base
ok thanks, mind made up... in the cargo floor it is then...
cheers
cheers