Hi
Can anyone help.Indicators work but the warning light on dash doesnt flash. When you put the hazzards on dash indicator light works? 1.9 1987 petrol.
Any help appreciated.
Kev and Lorraine
indicator warning light not working
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 26
- Joined: 07 Feb 2011, 10:27
- 80-90 Mem No: 9208
- Location: Gloucester
indicator warning light not working
VW T25 Autosleeper 1.9dg
-
- Registered user
- Posts: 22
- Joined: 19 May 2009, 15:50
- 80-90 Mem No: 6821
- Location: Bedfordshire
Re: indicator warning light not working
Have a look at the printed circuit on the back, probably something wrong with that as there so flimsy!
check there is power going to the contact for the LED, if not its probably the circuit.
if power replace led and see what happens!
check there is power going to the contact for the LED, if not its probably the circuit.
if power replace led and see what happens!
-
- Registered user
- Posts: 26
- Joined: 07 Feb 2011, 10:27
- 80-90 Mem No: 9208
- Location: Gloucester
Re: indicator warning light not working
Hi
Led works with hazzards on but not with indicators.
Led works with hazzards on but not with indicators.
VW T25 Autosleeper 1.9dg
- ewenmaclean
- Registered user
- Posts: 293
- Joined: 16 Nov 2006, 19:32
- 80-90 Mem No: 7306
- Location: Edinburgh
Re: indicator warning light not working
Hello,
the indicators are wired from the indicator switch through the hazard light switch - this'll probably be a hazard light switch that needs a bit of cleaning up. BOXY did a good diagram highlighting how it's wired up, and where the isolation between indicator and hazards is here:
https://club8090.co.uk/forum/viewtopic.p ... &p=7657798" onclick="window.open(this.href);return false;
it's not your exact problem but it might help to see the circuits, and why I reckon it's just the switch needs a bit of sorting out...
Hope this helps
Ewen
the indicators are wired from the indicator switch through the hazard light switch - this'll probably be a hazard light switch that needs a bit of cleaning up. BOXY did a good diagram highlighting how it's wired up, and where the isolation between indicator and hazards is here:
https://club8090.co.uk/forum/viewtopic.p ... &p=7657798" onclick="window.open(this.href);return false;
it's not your exact problem but it might help to see the circuits, and why I reckon it's just the switch needs a bit of sorting out...
Hope this helps
Ewen