Temp Gauge/fuse board/blowers/

An alchemy of sparks, copper wire and earth

Moderators: User administrators, Moderators

Locked
twindub1
Registered user
Posts: 69
Joined: 05 Aug 2011, 09:06
80-90 Mem No: 10095

Temp Gauge/fuse board/blowers/

Post by twindub1 »

Re: wiring/temp gauge/blowers

by twindub1 » 4 minutes ago

Hi all, can anyone advise me on the following. I have included photos to help explain. i have a blue and yellow cable twisted together in the engine, the same cable that run to the sensor below the thermostat housing on a vw caravelle 1988 1.9l.Image

Also i have found that the oil pressure cables have been twisted together as shown in photo below. Any reasons why this is, and should it go somewhere?Image

Finally in the fuse board can anyone tell me what relays should be there that arent,and what each relay does. Image

ps. the temp gauge doesnt work,and the red flashing light is always on. Also when one prong of the blower is slid accross its blows the 20amp fuse in fuseboard..
I appreciate any help i get on the above issues.

Regards
Kimon

Locked