
Jumping out of 4th gear
Moderators: User administrators, Moderators
- Trundler
- Registered user
- Posts: 171
- Joined: 08 Aug 2006, 12:08
- 80-90 Mem No: 2998
- Location: Nateby, Lancs
Re: Jumping out of 4th gear
OK guys, I'm getting the picture now. Looks like I need to PM Aiden... 

1987 Type25 Transporter Syncro 2.1DJ
+ some other less important vehicles...
80-90 member no. 2998
+ some other less important vehicles...
80-90 member no. 2998
- Trundler
- Registered user
- Posts: 171
- Joined: 08 Aug 2006, 12:08
- 80-90 Mem No: 2998
- Location: Nateby, Lancs
Re: Jumping out of 4th gear
OK, booked in with Aiden for a rebuild now. My next question is, if I decide I'm too lazy to hoik the gearbox out myself, how many hours labour should a garage charge me for the removal and refitting?? 
Roughly....

Roughly....
1987 Type25 Transporter Syncro 2.1DJ
+ some other less important vehicles...
80-90 member no. 2998
+ some other less important vehicles...
80-90 member no. 2998
- Aidan
- Trader
- Posts: 7075
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: Jumping out of 4th gear
if you are too lazy then 8 hours out and in plus a clutch and sundries, figure £500, on your own on the drive figure a day each way if you've not done it before, plus clutch and sundries, Pete can get them out in 40mins 

- Trundler
- Registered user
- Posts: 171
- Joined: 08 Aug 2006, 12:08
- 80-90 Mem No: 2998
- Location: Nateby, Lancs
Re: Jumping out of 4th gear
Cheers Aiden. The clutch is only 14,000miles old so I don't think I'll bother replacing that at this point. And that reminds me - the 'box must have been out when the clutch was done 2 years ago and that cost me £230 so I would have thought that £200-ish would cover the gearbox out and in...?
PS - who's this wondrous individual called Pete...?
PS - who's this wondrous individual called Pete...?

1987 Type25 Transporter Syncro 2.1DJ
+ some other less important vehicles...
80-90 member no. 2998
+ some other less important vehicles...
80-90 member no. 2998
- John Potter
- Registered user
- Posts: 280
- Joined: 09 Mar 2009, 13:34
- 80-90 Mem No: 6490
- Location: Rugby
Re: Jumping out of 4th gear
Took me two (cold, dark) long days in January to get the box out and three days to get it back in. Thats by myself, in the drive, van up on axle stands but a lot of that time was spent sitting and thinking (or just sitting
) and I did drop the sump off and replace the oil seals and grease the cv's and stuff.....
I reckon that with a buddy to pass tools, help with heavy stuff and the like I could get it down to about 5 hours each way now.
It helps that I now know where everything is (and of course the CV bolts are new and all the other bolts have been out recently)
I guess a garage with a ramp and a gearbox support could do it much quicker, maybe under the 4 hours mark each way so £140 @ 35ph
£230 to fit a clutch is a miracle assuming that includes the parts...

I reckon that with a buddy to pass tools, help with heavy stuff and the like I could get it down to about 5 hours each way now.
It helps that I now know where everything is (and of course the CV bolts are new and all the other bolts have been out recently)
I guess a garage with a ramp and a gearbox support could do it much quicker, maybe under the 4 hours mark each way so £140 @ 35ph
£230 to fit a clutch is a miracle assuming that includes the parts...
-
- Trader
- Posts: 17229
- Joined: 08 Jun 2009, 09:51
- 80-90 Mem No: 6908
- Location: Surrey Syncronaut #156
- Contact:
Re: Jumping out of 4th gear
I extracted the syncro gearbox in about 7 hours from first lifting the hatch to having it on the ground. That was my first Transporter gearbox and included leaving the engine in-situ, getting all the engine and prop protection off and it was done at home on the drive with just ramps and a trolley jack, all on my billy no mates own.
I've had worse days on the spanners, I just can't remember when or what...
I've had worse days on the spanners, I just can't remember when or what...
1985 Oettinger 3.2 Caravelle RHD syncro twin slider. SA Microbus bumpers, duplex winch system, ARC 7X15 period alloys
- Trundler
- Registered user
- Posts: 171
- Joined: 08 Aug 2006, 12:08
- 80-90 Mem No: 2998
- Location: Nateby, Lancs
Re: Jumping out of 4th gear
John Potter wrote:£230 to fit a clutch is a miracle assuming that includes the parts...
Well, it did include the parts. Not only that, when I first got the van back, the young lad at the garage hadn't secured the gearchange linkage properly with the result that it fell apart with the van in 4th gear about 15 miles up the road. When I rang to report this, the same young lad said I should try to get the van back to them


I don't know what happened to the young lad...

1987 Type25 Transporter Syncro 2.1DJ
+ some other less important vehicles...
80-90 member no. 2998
+ some other less important vehicles...
80-90 member no. 2998